PCB1 Power

ahaimour2005·BSF_Engineering_Better_Health-Medi_Development·System_Design/PCBs/PCB1_Power/out/PCB1_Power/PCB1_Power.kicad_pcb

PCB1 Power PCB layout, top view — open source board by ahaimour2005

About the PCB1 Power PCB

PCB1 Power is an open source PCB design by ahaimour2005, published on GitHub under the MIT license. It is a 2-layer board measuring 35 × 53 mm, with 4 components from 4 distinct parts.

Other key parts include the DFR1202. By type, the board carries 2 connectors, 1 IC and 1 capacitor.

It belongs with the displays & leds designs in this gallery.

From the project

MEDI is an interactive museum exhibit: a model human body where visitors press a button on a "pod" and the matching organ lights up. This repository holds everything for it: the firmware, the custom PCBs, the heart-rate sensor work that started the project, and the notes and data

MEDI is an interactive museum exhibit: a model human body where visitors press a button on a "pod" and the matching organ lights up. This repository holds everything for it: the firmware, the custom PCBs, the heart-rate sensor work that started the project, and the notes and datasheets behind them.

- Pods are wireless button boards placed around the room. One pod per organ (11 pods). - The conductor listens for pod presses and sends state commands (IDLE, HIGHLIGHT, PULSE, BLACKOUT) down a one-way wired bus. - Organ nodes each drive their own LED strip (NeoPixel) and own their animation…

Main components on the PCB1 Power

DFR1202

PCB1 Power bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DFR1202
U2
1
12-24V IN
J1
1
5V OUT
J2
1
1000uF 25V axial
C1

PCB1 Power design files

The KiCad project lives in the ahaimour2005/BSF_Engineering_Better_Health-Medi_Development repository on GitHub; these links point at the commit this page was built from.

PCB1 Power: common questions

How big is the PCB1 Power PCB?

The PCB1 Power measures 35 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB1 Power?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB1 Power design files?

From the ahaimour2005/BSF_Engineering_Better_Health-Medi_Development repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB1 Power design in my own project?

Yes, under the terms of its MIT license, which ahaimour2005 chose for the repository.

More boards in BSF_Engineering_Better_Health-Medi_Development

Similar boards