HardLabs

PCB4 Noods

ahaimour2005·BSF_Engineering_Better_Health-Medi_Development·System_Design/PCBs/PCB4_Noods/PCB4_Noods.kicad_pcb

PCB4 Noods PCB layout, top view — open source AVR/Arduino board by ahaimour2005
Simulate this board

About the PCB4 Noods PCB

PCB4 Noods is an open source AVR/Arduino PCB design by ahaimour2005, published on GitHub under the MIT license. It is a 2-layer board measuring 107 × 78 mm, with 71 components from 9 distinct parts.

Its main chip is the Arduino Power/GND, from the AVR/Arduino family. By type, the board carries 40 resistors, 16 transistors and 15 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

MEDI is an interactive museum exhibit: a model human body where visitors press a button on a "pod" and the matching organ lights up. This repository holds everything for it: the firmware, the custom PCBs, the heart-rate sensor work that started the project, and the notes and data

MEDI is an interactive museum exhibit: a model human body where visitors press a button on a "pod" and the matching organ lights up. This repository holds everything for it: the firmware, the custom PCBs, the heart-rate sensor work that started the project, and the notes and datasheets behind them.

- Pods are wireless button boards placed around the room. One pod per organ (11 pods). - The conductor listens for pod presses and sends state commands (IDLE, HIGHLIGHT, PULSE, BLACKOUT) down a one-way wired bus. - Organ nodes each drive their own LED strip (NeoPixel) and own their animation…

PCB4 Noods bill of materials (BOM)

71 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
IRLZ44N
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8
1
CONN_01X04_PIN
~
J1
1
CONN_02X04_ODD_EVEN
~
J2
11
~
J3, J4, J5, J6, J7, J8, J9, J10 +3
1
PWR
J13
1
Arduino Power/GND
J14
16
1K
R1, R2, R3, R4, R9, R10, R11, R12 +8
16
10K
R5, R6, R7, R8, R13, R14, R15, R16 +8
8
68
R25, R26, R27, R28, R37, R38, R39, R40

PCB4 Noods design files

The KiCad project lives in the ahaimour2005/BSF_Engineering_Better_Health-Medi_Development repository on GitHub; these links point at the commit this page was built from.

PCB4 Noods: common questions

What microcontroller does the PCB4 Noods use?

The PCB4 Noods is built around the Arduino Power/GND, from the AVR/Arduino family.

How big is the PCB4 Noods PCB?

The PCB4 Noods measures 107 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB4 Noods?

71 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB4 Noods design files?

From the ahaimour2005/BSF_Engineering_Better_Health-Medi_Development repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB4 Noods design in my own project?

Yes, under the terms of its MIT license, which ahaimour2005 chose for the repository.

Can I test firmware for the PCB4 Noods without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in BSF_Engineering_Better_Health-Medi_Development

Similar boards