HardLabs

Usb to serial

AhmedElwakeel·BoostController·Pic16f877a_ExploreUltraPicDevKit-master/Hardware Design Files/USB to Serial Converter Using CP2102/usb to serial.kicad_pcb

Usb to serial PCB layout, top view — open source board by AhmedElwakeel

About the Usb to serial PCB

Usb to serial is an open source PCB design by AhmedElwakeel, published on GitHub. It is a board measuring 30 × 20 mm, with 9 components from 8 distinct parts.

Other key parts include the CP2102. By type, the board carries 4 connectors, 2 capacitors, 1 IC, 1 diode and 1 resistor.

It belongs with the usb & debug tools designs in this gallery.

From the project

Boost Controller

Main components on the Usb to serial

CP2102

Usb to serial bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102
U1
1
USB-MINI-B
CON1
1
CONN_7
P1
2
CONN_1
P2, P3
1
LED
D1
1
0.1uF
C2
1
1uF
C3
1
330r
R1

Usb to serial design files

The KiCad project lives in the AhmedElwakeel/BoostController repository on GitHub; these links point at the commit this page was built from.

Usb to serial: common questions

How big is the Usb to serial PCB?

The Usb to serial measures 30 × 20 mm and is 1.6002 mm thick.

How many components are on the Usb to serial?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Usb to serial design files?

From the AhmedElwakeel/BoostController repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Usb to serial design in my own project?

The repository has no license, so all rights stay with AhmedElwakeel. Use it as a reference, and ask the author before reusing the design.

More boards in BoostController

Similar boards