42 open source boards using the CP2102

Real designs built with the CP2102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

42 boardsClear filters|Most starred

How designs wire the CP2102

Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the CP2102 connects to, and the resistors, capacitors and other passives placed on it.

  • The DCD pin is left unconnected on 28 of 28 designs.
  • The NC_13 pin is left unconnected on 28 of 28 designs.
  • The NC_14 pin is left unconnected on 28 of 28 designs.
  • The NC_15 pin is left unconnected on 28 of 28 designs.
DCDpin 1Connected to: Not connected 100%
RI_2pin 2Connected to: Not connected 93%
GNDpin 3, 29Connected to: GND 69% · not connected 23%
VDDpin 6Connected to: 3.3V 43% · not connected 18% · a signal 39%
  • Decoupling capacitor on 71% · 100 nF (18), 4.7 µF (4), 10 µF (2)
REGINpin 7Connected to: 5V 75%
  • Decoupling capacitor on 68% · 100 nF (14), 1 µF (6), 4.7 µF (4)
VBUSpin 8Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 54% · 100 nF (12), 10 µF (3), 1 µF (2)
RSTpin 9Connected to: Not connected 61% · a signal 36%
NCpin 10, 18Connected to: Not connected 100%
SUSPENDpin 11, 12Connected to: Not connected 89%
NC_13pin 13Connected to: Not connected 100%
NC_14pin 14Connected to: Not connected 100%
NC_15pin 15Connected to: Not connected 100%
NC_16pin 16Connected to: Not connected 100%
NC_17pin 17Connected to: Not connected 100%
NC_19pin 19Connected to: Not connected 93%
NC_20pin 20Connected to: Not connected 93%
NC_21pin 21Connected to: Not connected 93%
NC_22pin 22Connected to: Not connected 100%
CTSpin 23Connected to: Not connected 75% · a signal 25%
RTSpin 24Connected to: Signal 61% · not connected 39%
  • Series resistor on 46% · 10 kΩ (7), 12 kΩ (6)
RXDpin 25Connected to: A connector 36%, the microcontroller 25%
  • Series resistor on 39% · 100 Ω (2), 1 kΩ (1), 2 kΩ (1)
TXDpin 26Connected to: A connector 35%, the microcontroller 23%
  • Series resistor on 46% · 470 Ω (3), 100 Ω (2), 1 kΩ (1)
DSRpin 27Connected to: Not connected 100%
DTRpin 28Connected to: Signal 81% · not connected 19%
  • Series resistor on 58% · 10 kΩ (7), 12 kΩ (6), 4.7 kΩ (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ultimate base by ultimaterobotics, Ultra DB X51 v1 by ExploreEmbedded, ESP32BB by asukiaaa and Iotuz esp32-hardware by CCHS-Melbourne.

The CP2102 in open source designs

The gallery holds 42 open source boards using the CP2102 from 31 GitHub repositories; a typical one measures about 50 × 49.5 mm and carries around 43 components.

91% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.

The most starred is Ultimate base by ultimaterobotics.

Microcontrollers on boards using the CP2102

CP2102: common questions

Where can I find a CP2102 reference design?

Each of the 42 boards on this page is a real design using the CP2102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CP2102 DCD pin connected?

The DCD pin is left unconnected on 28 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the CP2102.

How is the CP2102 NC_13 pin connected?

The NC_13 pin is left unconnected on 28 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the CP2102.

How is the CP2102 NC_14 pin connected?

The NC_14 pin is left unconnected on 28 of 28 designs. Counted from the KiCad layouts of 28 open source designs using the CP2102.

What parts are used alongside the CP2102?

The AMS1117-3.3, ESP32-WROOM, 24C16, AP2112K and DS1307 appear in the most repositories here.

Which microcontrollers do boards using the CP2102 use?

Most are built on ESP32 (13), Nordic nRF (3), ESP8266 (2) and AVR/Arduino (1).

How big is a typical board using the CP2102?

The median is 50 × 49.5 mm, and 91% are two-layer designs.

What is the most popular open source board using the CP2102?

By GitHub stars, Ultimate base by ultimaterobotics, with 77 stars.

Can I simulate one of these boards using the CP2102 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part