HardLabs

POV PCBv1

Aitthikit·POV_Display_PCB·LED_Display/POV_PCBv1.kicad_pcb

POV PCBv1 PCB layout, top view — open source AVR/Arduino board by Aitthikit

About the POV PCBv1 PCB

POV PCBv1 is an open source AVR/Arduino PCB design by Aitthikit, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 24 components from 6 distinct parts.

Its main chip is the Arduino_Nano_ESP32, from the AVR/Arduino family. By type, the board carries 10 capacitors, 9 resistors, 4 diodes and 1 module.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

เอกสารสำหรับนำเสนออาจารย์ — สรุปการตัดสินใจดีไซน์ทั้งหมด

เอกสารสำหรับนำเสนออาจารย์ — สรุปการตัดสินใจดีไซน์ทั้งหมด

ชื่อโปรเจกต์: Rotating LED Display (POV - Persistence of Vision)

อ้างอิงหลัก: - Hackaday RD40: Rotating LED Display by lhm0 - Royer Converter from Mikrocontroller.net

ความต่างจากต้นฉบับ: | รายการ | RD40 ต้นฉบับ | โปรเจกต์ของเรา | |---|---|---| | จำนวนแถว LED | 2 แถว | 4 แถว | | LED ต่อแถว | 20 ตัว | 16 ตัว | | LED รวม | 40 ตัว | 64 ตัว | | MCU | Arduino Nano + ESP-01s | Arduino Nano เดียว | | Image storage | ESP-01s WiFi | PROGMEM (32KB Flash) | | ขนาด rotor | 120mm (CD size) | 120mm (เท่าเดิม) |

Main components on the POV PCBv1

Arduino_Nano_ESP32

POV PCBv1 bill of materials (BOM)

24 components, 6 distinct parts.

QtyPartRefs
1
Arduino_Nano_ESP32
A1
4
1N5818
D3, D68, D69, D70
2
220uF
C7, C16
8
0.1uF
C8, C9, C10, C11, C12, C13, C14, C15
1
20k
R2
8
R_Network08
RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8

POV PCBv1 design files

The KiCad project lives in the Aitthikit/POV_Display_PCB repository on GitHub; these links point at the commit this page was built from.

POV PCBv1: common questions

What microcontroller does the POV PCBv1 use?

The POV PCBv1 is built around the Arduino_Nano_ESP32, from the AVR/Arduino family.

How big is the POV PCBv1 PCB?

The POV PCBv1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the POV PCBv1?

24 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the POV PCBv1 design files?

From the Aitthikit/POV_Display_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the POV PCBv1 design in my own project?

The repository has no license, so all rights stay with Aitthikit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the POV PCBv1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in POV_Display_PCB

Similar boards