41 open source boards using the Arduino_Nano_ESP32
Real designs built with the Arduino_Nano_ESP32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Controller board
andia89
69 × 54 mm73 parts2LNo license6AVR/Arduino
KOTH V2
Salted-Peanuts
100 × 100 mm41 parts4LMIT4AVR/Arduino
Polaris4.1
porbital
95 × 99 mm90 parts2LNo license2AVR/Arduino
PCB-Domestic-Vibration---Motion-Sensor
MbFredys
30.6 × 47 mm10 parts2LMIT2- schematic only · 27 partsAVR/Arduino
GE-Opal-Reverse-Engineering-Project
SomeAspy
27 partsGPL-3.02 AVR/Arduino
CPRPal
Will946
78.8 × 71.9 mm41 parts2LMIT1AVR/Arduino
HSOD-Home-Security-Of-DOOM
NattDocumented
94.6 × 120.6 mm35 parts2LNo license1AVR/Arduino
FlipperInfinity
kylecmathias
70 × 100 mm14 parts2LNo license1- schematic only · 36 partsAVR/Arduino
Smart-Viscosity-Measurement and-Control-System-VYTRON
rashadrahimzade
36 partsCustom license1 AVR/Arduino
Campervan management V2.1
akladnig
169.5 × 96 mm168 parts4LNo license0AVR/Arduino
Schakelbord first
robbertvdzon
220.5 × 140.1 mm111 parts2LNo license0AVR/Arduino
Stno
Heinrich-XIAO
143.2 × 113.5 mm78 parts2LNo license0AVR/Arduino
Full Circuit
EthanSousaProjects
110 × 110 mm72 parts2LGPL-3.00AVR/Arduino
MAIN
nolanconrad
94 × 120 mm72 parts2LNo license0AVR/Arduino
Two motor
owhite
78 × 60 mm43 parts4LNo license0AVR/Arduino
Bidirectional-H-bridge motor driver with-MCU-and controlling buttons and knob
khalidislam377-gif
88 × 124.5 mm27 parts2LNo license0AVR/Arduino
ESP32 MacroPad Pro
motiforge-labs
80 × 100 mm26 parts2LNo license0AVR/Arduino
Meme o clock
Alwin936
88 × 100 mm24 parts4LNo license0AVR/Arduino
OLD-combat
mkhrenov
68.1 × 34.8 mm22 parts2LNo license0AVR/Arduino
Automatic-AC-Switch using-PIR-sensor
Manideep136
113.4 × 68.3 mm17 parts2LNo license0AVR/Arduino
6-channel nrf24l01-transmitter
Aritra607
124.3 × 39.5 mm11 parts2LNo license0ESP32
Embedded autonomy pcb navigation
KordbamTech
105.5 × 83.9 mm9 parts2LNo license0AVR/Arduino
Fifa-World-Cup-Romance-Test
fanglin0
40 × 37.5 mm6 parts2LNo license0AVR/Arduino
Nerf timer
Salted-Peanuts
75.9 × 93.5 mm30 parts4LMIT4AVR/Arduino
Polaris3.1
porbital
95 × 99 mm69 parts2LNo license2AVR/Arduino
Schakelbord
robbertvdzon
200 × 170 mm105 parts2LNo license0AVR/Arduino
MainPCB REV 3
nolanconrad
70.2 × 67.8 mm66 parts2LNo license0AVR/Arduino
RGB Mood Light V1
motiforge-labs
60 × 70 mm21 parts2LNo license0AVR/Arduino
Cicuit Bar
EthanSousaProjects
67.9 × 55.7 mm18 parts2LGPL-3.00AVR/Arduino
Combat
mkhrenov
73.4 × 41.9 mm17 parts2LNo license0- schematic only · 253 partsAVR/Arduino
Camper van
akladnig
253 parts2LNo license0 AVR/Arduino
Nolan
nolanconrad
100 × 100 mm45 parts2LNo license0AVR/Arduino
POV PCBv1
Aitthikit
100 × 100 mm24 parts2LNo license0AVR/Arduino
ESP32 OLED Weather Display
motiforge-labs
50 × 90 mm14 parts2LNo license0ESP32
PCB3 Contoller
ahaimour2005
35 × 70 mm8 parts2LMIT0AVR/Arduino
Circuit Pulse Count
EthanSousaProjects
61 × 54.7 mm5 parts2LGPL-3.00
How designs wire the Arduino_Nano_ESP32
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the Arduino_Nano_ESP32 connects to, and the resistors, capacitors and other passives placed on it.
- The B0 pin is left unconnected on 23 of 24 designs.
- The B1 pin is left unconnected on 23 of 24 designs.
- The RESET pin is left unconnected on 19 of 24 designs (a signal on 5).
- The A6 pin is left unconnected on 18 of 24 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESETpin 3 | Connected to: Not connected 79% · a signal 21% | — |
| GNDpin 4, 29 | Connected to: GND 96% | — |
| 3V3pin 17 | Connected to: 3.3V 63% · not connected 33% | — |
| B0pin 18 | Connected to: Not connected 96% | — |
| A6pin 25 | Connected to: Not connected 75% · a signal 25% | — |
| A7pin 26 | Connected to: Not connected 67% · a signal 33% | — |
| B1pin 28 | Connected to: Not connected 96% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Controller board by andia89, KOTH V2 by Salted-Peanuts, PCB-Domestic-Vibration---Motion-Sensor by MbFredys and NametagVoltmeter by oihdesigns.
The Arduino_Nano_ESP32 in open source designs
The gallery holds 41 open source boards using the Arduino_Nano_ESP32 from 26 GitHub repositories; a typical one measures about 79.4 × 77.9 mm and carries around 27 components.
85% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Controller board by andia89.
Parts used alongside the Arduino_Nano_ESP32
Microcontrollers on boards using the Arduino_Nano_ESP32
What boards using the Arduino_Nano_ESP32 are built for
Arduino_Nano_ESP32: common questions
Where can I find a Arduino_Nano_ESP32 reference design?
Each of the 41 boards on this page is a real design using the Arduino_Nano_ESP32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Arduino_Nano_ESP32 B0 pin connected?
The B0 pin is left unconnected on 23 of 24 designs. Counted from the KiCad layouts of 24 open source designs using the Arduino_Nano_ESP32.
How is the Arduino_Nano_ESP32 B1 pin connected?
The B1 pin is left unconnected on 23 of 24 designs. Counted from the KiCad layouts of 24 open source designs using the Arduino_Nano_ESP32.
How is the Arduino_Nano_ESP32 RESET pin connected?
The RESET pin is left unconnected on 19 of 24 designs (a signal on 5). Counted from the KiCad layouts of 24 open source designs using the Arduino_Nano_ESP32.
What parts are used alongside the Arduino_Nano_ESP32?
The Arduino_Nano_v3.x, COM-09032, DS18B20 and MPU-6050 appear in the most repositories here.
Which microcontrollers do boards using the Arduino_Nano_ESP32 use?
Most are built on AVR/Arduino (39) and ESP32 (2).
How big is a typical board using the Arduino_Nano_ESP32?
The median is 79.4 × 77.9 mm, and 85% are two-layer designs.
What is the most popular open source board using the Arduino_Nano_ESP32?
By GitHub stars, Controller board by andia89, with 6 stars.
Can I simulate one of these boards using the Arduino_Nano_ESP32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.