Ai rescue rover
ajaiseelan333-cpu·ai-rescue-rover·electronics/kicad/AI_Rescue_Rover.kicad_pcb
About the Ai rescue rover PCB
Ai rescue rover is an open source ESP32 PCB design by ajaiseelan333-cpu, published on GitHub. It is a 2-layer board measuring 140 × 105 mm, with 25 components from 20 distinct parts.
Its main chip is the ESP32-CAM, from the ESP32 family. By type, the board carries 13 connectors, 10 resistors, 1 fuse and 1 capacitor.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Low-cost tracked scout rover for disaster zones. It enters a collapsed or smoke-filled structure before rescuers and sends back live video, person-detection alerts, and gas and temperature readings.
Low-cost tracked scout rover for disaster zones. It enters a collapsed or smoke-filled structure before rescuers and sends back live video, person-detection alerts, and gas and temperature readings.
Team Novastra (Ajai Seelan R, Dharani N, Akash Kishore, Harini M, Ameera A), Easwari Engineering College. Vishwakarma Awards 2026-27, Stage 2 submission.
- Carrier PCB: Rev 0.1, 140.1 × 105.1 mm, 2 layers, all through-hole. KiCad DRC clean (0 violations, 0 unconnected pads). - Motor driver bench test sketch written; full rover assembly and physical tests pending. - SiWG917 pad functions (ADC…
Ai rescue rover bill of materials (BOM)
25 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMS P+/P- | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | SW1 Main | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | LM2596 IN | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LM2596 OUT | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SW2 Motor | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | MQ-2 | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | MQ-7 | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | HC-SR04 L | PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | HC-SR04 R | PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | SiWx917 BRD2605A | PinHeader_2x09_P2.54mm_Vertical | J10 |
| 1 | VL53L0X | PinSocket_1x06_P2.54mm_Vertical | J11 |
| 1 | ESP32-CAM | PinSocket_1x03_P2.54mm_Vertical | J12 |
| 1 | L9110 driver | PinSocket_1x06_P2.54mm_Vertical | J13 |
| 1 | 5A 5x20 | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 470uF 16V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 3 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R10 |
| 2 | 20K 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R7 |
| 2 | 2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8 |
| 1 | 33K 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Ai rescue rover design files
The KiCad project lives in the ajaiseelan333-cpu/ai-rescue-rover repository on GitHub; these links point at the commit this page was built from.
Ai rescue rover: common questions
What microcontroller does the Ai rescue rover use?
The Ai rescue rover is built around the ESP32-CAM, from the ESP32 family.
How big is the Ai rescue rover PCB?
The Ai rescue rover measures 140 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ai rescue rover?
25 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ai rescue rover design files?
From the ajaiseelan333-cpu/ai-rescue-rover repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ai rescue rover design in my own project?
The repository has no license, so all rights stay with ajaiseelan333-cpu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ai rescue rover without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k