Trs80-1-psu
ak15199·trs80-1-psu
About the Trs80-1-psu PCB
Trs80-1-psu is an open source PCB design by ak15199, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 158.9 × 76.6 mm, with 15 components from 13 distinct parts.
By type, the board carries 5 connectors, 4 jumpers, 2 transformers, 1 fuse, 1 diode and 1 capacitor.
It belongs with the power & battery designs in this gallery.
From the project
Schematics, PCB layout, and case for a replacement TRS-80 Model 1 power supply
A lot of great work has been done by Dan Bear and others over the years to recreate the now virtually impossible to acquire power supply for the TRS-80 Model 1.
Researching prior art, I set out to create something that - although larger than the original - would not look out of place.
This repository contains the schematic and PCB layout along with the separate models required to 3D print the case. There's also a model to cover the exposed contacts on the fuse caddy.

Trs80-1-psu bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | Molex_KK-396_5273-02A_1x02_P3.96mm_Vertical | J1 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | 57PC5FS | SWITCHCRAFT_57PC5FS | J3, J4 |
| 1 | Conn_01x03_Socket | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Fuse 1A@250V | FUSE_0PTF0078P_LTF | F1 |
| 1 | CLOSE FOR CHASSIS FUSE | SolderJumper-2_P1.5mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 2 | CLOSE FOR 110V | SolderJumper-2_P1.5mm_Open_RoundedPad1.0x1.5mm | JP4, JP5 |
| 1 | CLOSE FOR 220V | SolderJumper-2_P1.5mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | Amgis L01-6361 9-0-9 | Amgis 25VA | T1 |
| 1 | Amgis L01-6360 7-0-7 | Amgis 25VA | T2 |
| 1 | D_Bridge_+-AA | Diode_Bridge_Round_D9.8mm | D1 |
| 1 | 1000uF | CP_Radial_D13.0mm_P5.00mm | C1 |
| 1 | 2K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Trs80-1-psu design files
The KiCad project lives in the ak15199/trs80-1-psu repository on GitHub; these links point at the commit this page was built from.
- LayoutPower Supply.kicad_pcb
- SchematicPower Supply.kicad_sch
Trs80-1-psu: common questions
How big is the Trs80-1-psu PCB?
The Trs80-1-psu measures 158.9 × 76.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Trs80-1-psu?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Trs80-1-psu design files?
From the ak15199/trs80-1-psu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Trs80-1-psu design in my own project?
Yes, under the terms of its GPL-2.0 license, which ak15199 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k