HardLabs

Hackpadv2

AlanikREDAWN·hackpadv2

Hackpadv2 PCB layout, top view — open source RP2040/RP2350 board by AlanikREDAWN

About the Hackpadv2 PCB

Hackpadv2 is an open source RP2040/RP2350 PCB design by AlanikREDAWN, published on GitHub. It is a 2-layer board measuring 294.5 × 140.3 mm, with 164 components from 7 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. By type, the board carries 81 diodes, 79 switches, 2 resistors, 1 IC and 1 connector.

Main components on the Hackpadv2

Raspberry_Pi_Pico

Hackpadv2 bill of materials (BOM)

164 components, 7 distinct parts.

QtyPartRefs
1
Raspberry_Pi_Pico
U2
1
OLED_128x32
J1
78
Keyswitch
S1, S2, S3, S4, S5, S6, S7, S8 +70
1
Keyswitch
S126
79
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +71
2
LED
D131, D132
2
100ohm
R1, R2

Hackpadv2 design files

The KiCad project lives in the AlanikREDAWN/hackpadv2 repository on GitHub; these links point at the commit this page was built from.

Hackpadv2: common questions

What microcontroller does the Hackpadv2 use?

The Hackpadv2 is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the Hackpadv2 PCB?

The Hackpadv2 measures 294.5 × 140.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackpadv2?

164 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hackpadv2 design files?

From the AlanikREDAWN/hackpadv2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hackpadv2 design in my own project?

The repository has no license, so all rights stay with AlanikREDAWN. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackpadv2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards