HardLabs

TrackerGPS

alassaneg·trackerGPS·trackerGPS/trackerGPS.kicad_pcb

TrackerGPS PCB layout, top view — open source PIC board by alassaneg

About the TrackerGPS PCB

TrackerGPS is an open source PIC PCB design by alassaneg, published on GitHub. It is a 4-layer board measuring 60.8 × 33.6 mm, with 63 components from 36 distinct parts.

Its main chip is the PIC32MM0256GPM028-I_ML, from the PIC family. Other key parts include the BQ24072TRGTT, L86-M33, REG113NA-3.3_3K, TLV75201PDSQT and MFF2_E_SIM. By type, the board carries 27 capacitors, 20 resistors, 8 ICs, 4 connectors, 2 diodes and 1 transistor.

It belongs with the rf & radio designs in this gallery.

From the project

Tracker GPS with gsm functionality and eSim

Main components on the TrackerGPS

PIC32MM0256GPM028-I_MLBQ24072TRGTTL86-M33REG113NA-3.3_3KTLV75201PDSQTMFF2_E_SIMM95

TrackerGPS bill of materials (BOM)

63 components, 36 distinct parts.

QtyPartRefs
1
PIC32MM0256GPM028-I_ML
IC1
1
BQ24072TRGTT
IC2
1
L86-M33
IC5
2
REG113NA-3.3_3K
U1, U4
1
TLV75201PDSQT
U2
1
MFF2_E_SIM
U3
1
M95
U5
1
BC847BW,115
Q2
1
ABM8G-48.000MHZ-18-D2Y-T
Y1
1
Conn
J2
1
902-9235
J3
1
USB_B_Micro
J4
1
Conn_Coaxial
J5
2
LED_Small
D1, D2
2
1uF
C1, C7
4
33pF
C2, C3, C4, C27
1
100uF
C5
3
10uF
C6, C21, C22
4
4.7uF
C8, C9, C15, C16
7
100nF
C10, C11, C13, C17, C23, C24, C28
Show 16 more
QtyPartRefs
2
1nF
C12, C14
1
470nF
C18
2
28pF
C25, C26
1
10pF
C29
3
R_Small
R1, R2, R3
1
602ohm
R4
2
10kOhm
R5, R8
1
47kOhm
R9
1
200kOhm
R10
1
49.9kOhm
R11
2
1.5kOhm
R12, R16
1
NP
R13
1
900ohm
R14
5
0ohm
R15, R19, R20, R21, R22
1
5.56kOhm
R17
1
1kOhm
R18

TrackerGPS design files

The KiCad project lives in the alassaneg/trackerGPS repository on GitHub; these links point at the commit this page was built from.

TrackerGPS: common questions

What microcontroller does the TrackerGPS use?

The TrackerGPS is built around the PIC32MM0256GPM028-I_ML, from the PIC family.

How big is the TrackerGPS PCB?

The TrackerGPS measures 60.8 × 33.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TrackerGPS?

63 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the TrackerGPS design files?

From the alassaneg/trackerGPS repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the TrackerGPS design in my own project?

The repository has no license, so all rights stay with alassaneg. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TrackerGPS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards