21 open source boards using the L86-M33
Real designs built with the L86-M33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Bwlr3d
teapotlaboratories
36.8 × 90.9 mm88 parts2LMIT18ESP32
GLARE
RR-CREATOR
102.4 × 27.5 mm86 parts4LMIT10GNSS-GPS-L86-M33-breakout hardware design
SolderedElectronics
38 × 54 mm33 parts2LTAPR-OHL-1.06LoRa-COW
JuanVicaria
100 × 80 mm101 parts4LCC-BY-NC-4.04AVR/Arduino
GNSS GPS L86-M33 breakout with easyC
SolderedElectronics
54 × 38 mm31 parts2LTAPR-OHL-1.02PIC
TrackerGPS
alassaneg
60.8 × 33.6 mm63 parts4LNo license1AVR/Arduino
GNSS GPS L86-M33 breakout with easyC
SolderedElectronics
54 × 38 mm31 parts2LTAPR-OHL-1.01Microchip SAM
Samd51 gps alarm clock
KrHaaland
80 × 50 mm149 parts2LNo license0ESP32
FLP PCB set
DSM-Interrupt
70 × 70 mm118 parts2LNo license0ESP32
MistFarm Embedded
Mistfarm
74.4 × 95.2 mm56 parts2LNo license0STM32
DroneController
FPV-Drone-STM32F411
55 × 55 mm65 parts4LNo license57AVR/Arduino
GNSS GPS L86-M33 breakout with easyC panel
SolderedElectronics
162 × 164 mm31 parts2LTAPR-OHL-1.02STM32
DroneController
IoT-App-Development-Company
55 × 55 mm65 parts4LNo license1AVR/Arduino
GNSS GPS L86-M33 breakout with easyC panel
SolderedElectronics
162 × 164 mm31 parts2LTAPR-OHL-1.01Microchip SAM
GNSS Alarm Clock
KrHaaland
80 × 50 mm146 parts4LNo license0ESP32
FLP PCB host
DSM-Interrupt
90 × 90.5 mm92 parts2LNo license0Silicon Labs
RTLS Mainboard V4
KhanKudo
45 × 45 mm74 parts4LNo license0STM32
DroneController
Monacrylic
55 × 55 mm65 parts4LNo license2STM32
FLP PCB terminal
DSM-Interrupt
80 × 80 mm79 parts4LNo license0STM32
X drone controller
Monacrylic
55 × 55 mm65 parts4LNo license2RTLS BLE GPS
KhanKudo
65 × 46.2 mm14 parts2LNo license0
How designs wire the L86-M33
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the L86-M33 connects to, and the resistors, capacitors and other passives placed on it.
- The EX_ANT pin is left unconnected on 11 of 14 designs (a signal on 3).
- The VCC pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF).
- The AADET_N pin is left unconnected on 10 of 14 designs (a signal on 4).
- The V_BCKP pin has a capacitor to GND on 8 of 14 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 12 | Connected to: GND 100% | — |
| VCCpin 4 | Connected to: 3.3V 71% · a signal 29% |
|
| V_BCKPpin 5 | Connected to: Signal 64% · BATT 36% |
|
| AADET_Npin 8 | Connected to: Not connected 71% · a signal 29% | — |
| NCpin 9 | Connected to: Not connected 100% | — |
| EX_ANTpin 11 | Connected to: Not connected 79% · a signal 21% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DroneController by FPV-Drone-STM32F411, Bwlr3d by teapotlaboratories, GLARE by RR-CREATOR and GNSS-GPS-L86-M33-breakout hardware design by SolderedElectronics.
The L86-M33 in open source designs
The gallery holds 21 open source boards using the L86-M33 from 14 GitHub repositories; a typical one measures about 65 × 55 mm and carries around 65 components.
52% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is DroneController by FPV-Drone-STM32F411.
Parts used alongside the L86-M33
Microcontrollers on boards using the L86-M33
What boards using the L86-M33 are built for
L86-M33: common questions
Where can I find a L86-M33 reference design?
Each of the 21 boards on this page is a real design using the L86-M33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L86-M33 EX_ANT pin connected?
The EX_ANT pin is left unconnected on 11 of 14 designs (a signal on 3). Counted from the KiCad layouts of 14 open source designs using the L86-M33.
What decoupling capacitors do designs use on the L86-M33 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the L86-M33.
How is the L86-M33 AADET_N pin connected?
The AADET_N pin is left unconnected on 10 of 14 designs (a signal on 4). Counted from the KiCad layouts of 14 open source designs using the L86-M33.
What parts are used alongside the L86-M33?
The BMP280, ICM-42605, AP7361C-33E-13, ATTINY1604-SSNR and CP2104 appear in the most repositories here.
Which microcontrollers do boards using the L86-M33 use?
Most are built on STM32 (5), AVR/Arduino (4), ESP32 (4) and Microchip SAM (2).
How big is a typical board using the L86-M33?
The median is 65 × 55 mm, and 52% are two-layer designs.
What is the most popular open source board using the L86-M33?
By GitHub stars, DroneController by FPV-Drone-STM32F411, with 57 stars.
Can I simulate one of these boards using the L86-M33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.