WaypointCompassCarrier
albash0·WaypointCompass·WaypointCompass/PCB/WaypointCompassCarrier.kicad_pcb
About the WaypointCompassCarrier PCB
WaypointCompassCarrier is an open source ESP32 PCB design by albash0, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 60 × 40 mm, with 8 components from 7 distinct parts.
Its main chip is the ESP32-S3 SuperMini, from the ESP32 family. By type, the board carries 5 connectors, 2 switches and 1 jumper.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Offline GPS compass: magnetic calibration, tilt compensation, embedded UI and modular/compact PCB designs. Personal engineering project.
The ESP32 selects the closest of 19 retail liquor stores from the City of Boulder's public liquor-license map, using the current GPS position. It runs offline: no Wi-Fi, account, phone or API key is needed.
- Mint-and-gold arrow, rotating north/cardinal markers and a large distance readout. - Store name and left/right turn cue; north-up fallback when neither magnetometer heading nor GPS course is available. - Animated GPS radar while acquiring a fix. No target arrow is shown with a stale or missing fix. - Animated bottle calibration screen and a "FOUND IT!" celebration within 25 m of the…
WaypointCompassCarrier bill of materials (BOM)
8 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3 SuperMini | ESP32_S3_SuperMini_2x09_Sockets | J1 |
| 1 | GC9A01 TFT | GC9A01_TFT_Socket | J2 |
| 1 | GPS CABLE | GPS_CABLE_Socket | J3 |
| 1 | GY-521 | GY_521_Socket | J4 |
| 1 | GY-271 | GY_271_Socket | J5 |
| 1 | GPS VOLTAGE | GPS_VOLTAGE_Socket | JP1 |
| 2 | 6x6 tactile | SW_PUSH_6mm | SW1, SW2 |
WaypointCompassCarrier design files
The KiCad project lives in the albash0/WaypointCompass repository on GitHub; these links point at the commit this page was built from.
WaypointCompassCarrier: common questions
What microcontroller does the WaypointCompassCarrier use?
The WaypointCompassCarrier is built around the ESP32-S3 SuperMini, from the ESP32 family.
How big is the WaypointCompassCarrier PCB?
The WaypointCompassCarrier measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WaypointCompassCarrier?
8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WaypointCompassCarrier design files?
From the albash0/WaypointCompass repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WaypointCompassCarrier design in my own project?
Yes, under the terms of its GPL-2.0 license, which albash0 chose for the repository.
Can I test firmware for the WaypointCompassCarrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in WaypointCompass
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k