Teensy based-Multieffect-Pedal

Alemagpie·Teensy-based-Multieffect-Pedal·Schematics/ToManufacturer/REV A/PCB-schematics.kicad_pcb

Teensy based-Multieffect-Pedal PCB layout, top view — open source board by Alemagpie

About the Teensy based-Multieffect-Pedal PCB

Teensy based-Multieffect-Pedal is an open source PCB design by Alemagpie, published on GitHub. It is a 2-layer board measuring 86.5 × 99 mm, with 22 components from 12 distinct parts.

By type, the board carries 11 capacitors and 11 resistors.

It belongs with the audio designs in this gallery.

From the project

- Distortion effect with 4 parameters (gain, bias, treble, volume) - Tremolo effect with 3 parameters (frequency, shape, depth) - Bitcrusher effect with 4 parameters (resolution, down-sampling, mix, low pass) - Vibrato effect with 3 parameters (speed, depth, tone) - Chorus effect

- Distortion effect with 4 parameters (gain, bias, treble, volume) - Tremolo effect with 3 parameters (frequency, shape, depth) - Bitcrusher effect with 4 parameters (resolution, down-sampling, mix, low pass) - Vibrato effect with 3 parameters (speed, depth, tone) - Chorus effect with 4 parameters (speed, depth, voices, mix) - Delay with 4 parameters (time, feedback, dry, wet) - Envelope filter (QTron style) with 4 parameters (sensibility, resonance, attack/release, filter type) - Ring modulator with 4 parameters (frequency, shape, depth, mix) - Square wave octaver with 4 parameters (dry…

Teensy based-Multieffect-Pedal bill of materials (BOM)

22 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
100P
100p
C1
1
1n
C2
1
2.2N
2.2n
C3
2
1u
C4, C5
1
100U
100u
C6
5
100N
100n
C7, C8, C9, C10, C11
2
10K
10k
R1, R2
5
1M
R3, R4, R5, R7, R8
1
3.3K
3.3k
R6
1
100
R9
1
100K
100k
R10
1
330
R11

Teensy based-Multieffect-Pedal design files

The KiCad project lives in the Alemagpie/Teensy-based-Multieffect-Pedal repository on GitHub; these links point at the commit this page was built from.

Teensy based-Multieffect-Pedal: common questions

How big is the Teensy based-Multieffect-Pedal PCB?

The Teensy based-Multieffect-Pedal measures 86.5 × 99 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Teensy based-Multieffect-Pedal?

22 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Teensy based-Multieffect-Pedal design files?

From the Alemagpie/Teensy-based-Multieffect-Pedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Teensy based-Multieffect-Pedal design in my own project?

The repository has no license, so all rights stay with Alemagpie. Use it as a reference, and ask the author before reusing the design.

Similar boards