HardLabs

USB

shanteacontrols·OpenDeck·sch/dubfocus/16t/USB/USB.kicad_pcb

USB PCB layout, top view — open source board by shanteacontrols
Simulate this board

About the USB PCB

USB is an open source PCB design by shanteacontrols, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 52 × 12.6 mm, with 6 components from 5 distinct parts.

By type, the board carries 2 resistors, 1 connector, 1 diode and 1 inductor.

It belongs with the audio, displays & leds and sensors designs in this gallery.

From the project

A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

OpenDeck is a platform for building interactive control and sensing devices using MIDI and OSC. From USB MIDI DJ controllers and DAW control surfaces to Ethernet-connected OSC nodes, sensor interfaces and media installations, OpenDeck supports a wide range of hardware projects.

Browser-based configuration No firmware development required Hardware-independent - supports multiple MCU families and development boards MIDI and OSC support * Extensible sensor support

USB, from the project README
From the project README

USB bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X04
Conn_01x04
CONN2
1
PRTR5V0U2X
D1
1
C85840
FerriteBead
FB1
2
5.1K
5.1k
R1, R2

USB design files

The KiCad project lives in the shanteacontrols/OpenDeck repository on GitHub; these links point at the commit this page was built from.

USB: common questions

How big is the USB PCB?

The USB measures 52 × 12.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USB design files?

From the shanteacontrols/OpenDeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USB design in my own project?

Yes, under the terms of its Apache-2.0 license, which shanteacontrols chose for the repository.

More boards in OpenDeck

Similar boards