SolarPowerhouse
AlexanderTonn·SolarPowerhouse·KiCad/docSolar.kicad_sch
About the SolarPowerhouse PCB
SolarPowerhouse is an open source PCB design by AlexanderTonn, published on GitHub under the Apache-2.0 license. It is a board, with 46 components from 21 distinct parts.
Other key parts include the L78S05. By type, the board carries 6 crystals, 6 connectors, 6 fuses, 6 capacitors, 4 diodes and 4 resistors.
It belongs with the power & battery designs in this gallery.
From the project
Solar balkony power plant, which includes control logic for switching between micro inverter and battery depending on the state of charge. The repository containing any drawings and manuals.
Main components on the SolarPowerhouse
SolarPowerhouse bill of materials (BOM)
46 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | L78S05 | U1, U2 | |
| 1 | Reihenklemme_2-pol | X1+1 | |
| 4 | Reihenklemme_4-pol | X2+1, X3-1, X5+1, X6-1 | |
| 1 | Reihenklemme_3-pol | X4 | |
| 1 | Screw_Terminal_01x02 | J1 | |
| 2 | Conn_02x02_Odd_Even | J2, J4 | |
| 2 | USB_A | J3, J5 | |
| 1 | Conn_WallSocket_Earth | J9 | |
| 1 | 120Ah | BT1 | |
| 3 | 6A gR | F1, F2, F3 | |
| 1 | C1,6A | F4 | |
| 2 | B25A | F5, F6 | |
| 3 | power_contactor | K1, K2, K3 | |
| 6 | Solar_Cell | SC1, SC2, SC3, SC4, SC5, SC6 | |
| 1 | Siungle_Mikroinverter | T1 | |
| 1 | SR-ML2440 | T2 | |
| 4 | LED | D1, D3, D4, D5 | |
| 2 | 1m | C1, C4 | |
| 2 | 220n | C2, C5 | |
| 2 | 100n | C3, C6 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 330 | R1, R2, R3, R4 |
SolarPowerhouse design files
The KiCad project lives in the AlexanderTonn/SolarPowerhouse repository on GitHub; these links point at the commit this page was built from.
- SchematicKiCad/docSolar.kicad_sch
- NetlistKiCad/SolarPowerhouse.xml
SolarPowerhouse: common questions
How many components are on the SolarPowerhouse?
46 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the SolarPowerhouse design files?
From the AlexanderTonn/SolarPowerhouse repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the SolarPowerhouse design in my own project?
Yes, under the terms of its Apache-2.0 license, which AlexanderTonn chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k