Philips-GAM-48-303-daughterboard
alexmrqt·Philips-GAM-48-303-daughterboard·soldering-station-hat/soldering-station-hat.kicad_pcb
About the Philips-GAM-48-303-daughterboard PCB
Philips-GAM-48-303-daughterboard is an open source PCB design by alexmrqt, published on GitHub. It is a 2-layer board measuring 27.9 × 36.8 mm, with 7 components from 5 distinct parts.
Other key parts include the UAA2016PG and CA3140. By type, the board carries 4 connectors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A daughterboard to fix Philips GAM 48-303 soldering stations with faulty U106BS chips.
On the inside, it is only based around four main components: - A mains transformer that step down 230V AC to 24V AC, - A TIC225A triac to deliver (or not) power to the iron, - A CA3140 op-amp to compute an error signal from the temperature set point and the iron temperature, - A U106BS "monolithic integrated zero voltage", which is used to drive the triac (TIC225A) based on the error signal computed by the CA3140A op-amp (proportional controller).

Main components on the Philips-GAM-48-303-daughterboard
Philips-GAM-48-303-daughterboard bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UAA2016PG | DIP-8_W7.62mm | IC1 |
| 1 | CA3140 | DIP-8_W7.62mm | U2 |
| 2 | CONN_01X08 | Pin_Header_Straight_1x08_Pitch2.54mm | P1, P3 |
| 2 | CONN_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm | P2, P4 |
| 1 | 200k | Potentiometer_WirePads_Small | RV1 |
Philips-GAM-48-303-daughterboard design files
The KiCad project lives in the alexmrqt/Philips-GAM-48-303-daughterboard repository on GitHub; these links point at the commit this page was built from.
Philips-GAM-48-303-daughterboard: common questions
How big is the Philips-GAM-48-303-daughterboard PCB?
The Philips-GAM-48-303-daughterboard measures 27.9 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Philips-GAM-48-303-daughterboard?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Philips-GAM-48-303-daughterboard design files?
From the alexmrqt/Philips-GAM-48-303-daughterboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Philips-GAM-48-303-daughterboard design in my own project?
The repository has no license, so all rights stay with alexmrqt. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979