Meme o clock
Alwin936·meme-o-clock
About the Meme o clock PCB
Meme o clock is an open source AVR/Arduino PCB design by Alwin936, published on GitHub. It is a 4-layer board measuring 88 × 100 mm, with 24 components from 13 distinct parts.
Its main chip is the ARDUINO_NANO_ESP32, from the AVR/Arduino family. Other key parts include the MAX98357A and APDS-9306. By type, the board carries 7 resistors, 6 capacitors, 4 connectors, 4 switches, 2 ICs and 1 module.
It belongs with the audio and displays & leds designs in this gallery.
From the project
A custom alarm clock designed to wake you up in a unique and humorous way.
I built it with the help of a Youtube tutorial, ChatGPT, and KiCAD.
This is my first ever time designing a PCB.
I chose an Arduino Nano ESP 32 as my microcontroller due to the familiar ecosystem and WiFi capabilities.
The arduino will instruct a speaker and display to work as an alarm clock, with custom sounds and objects displayed to wake you up in a personal way.
Main components on the Meme o clock
Meme o clock bill of materials (BOM)
24 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U1 |
| 1 | APDS-9306 | Broadcom_LGA-8_2x2mm_P0.53mm | U2 |
| 1 | ARDUINO_NANO_ESP32 Arduino_Nano_ESP32 | Arduino_Nano | A1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 4 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 5 | 100N 100n | C_0603_1608Metric | C1, C2, C3, C4, C6 |
| 1 | 10U 10u | C_0805_2012Metric | C5 |
| 4 | 10K 10k | R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R5, R6 |
| 1 | 634K 634k | R_0603_1608Metric | R7 |
Meme o clock design files
The KiCad project lives in the Alwin936/meme-o-clock repository on GitHub; these links point at the commit this page was built from.
- Layoutmeme-o-clock-pcb.kicad_pcb
- Schematicmeme-o-clock-pcb.kicad_sch
- BOMmeme-o-clock-bom.csv
Meme o clock: common questions
What microcontroller does the Meme o clock use?
The Meme o clock is built around the ARDUINO_NANO_ESP32, from the AVR/Arduino family.
How big is the Meme o clock PCB?
The Meme o clock measures 88 × 100 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Meme o clock?
24 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Meme o clock design files?
From the Alwin936/meme-o-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Meme o clock design in my own project?
The repository has no license, so all rights stay with Alwin936. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Meme o clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k