HardLabs

Jalsetu

amannsaini0507-max·jalsetu·hardware/schematics/netlists/n3_pressure.net

This repository ships a schematic but no board layout.

About the Jalsetu PCB

Jalsetu is an open source ESP32 PCB design by amannsaini0507-max, published on GitHub under the MIT license. It is a board, with 12 components from 11 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the SX1276-IN865 and A7672S-LTE-CAT1. By type, the board carries 3 ICs and 1 transistor.

It belongs with the power & battery and iot & wireless designs in this gallery.

From the project

JalSetu - Smart Water Monitoring, Distribution and Management System

This folder contains the complete circuit schematics, pin mapping, power analysis, and netlists for the JalSetu IoT edge node family under Jal Jeevan Mission (JJM) FHTC monitoring.

Main components on the Jalsetu

ESP32-WROOM-32DSX1276-IN865A7672S-LTE-CAT1

Jalsetu bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32D
U1
1
SX1276-IN865
U2
1
A7672S-LTE-CAT1
U3
1
SI2301
Q1
1
1000uF/10V
C_BULK1
1
PRESSURE_0_10BAR_0.5_4.5V
PT1
2
100k
R_BAT1, R_BAT2
1
20k_0.1%
R_P1
1
33k_0.1%
R_P2
1
10k
R_TF1
1
20k
R_TF2

Jalsetu design files

The KiCad project lives in the amannsaini0507-max/jalsetu repository on GitHub; these links point at the commit this page was built from.

Jalsetu: common questions

What microcontroller does the Jalsetu use?

The Jalsetu is built around the ESP32-WROOM-32D, from the ESP32 family.

How many components are on the Jalsetu?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jalsetu design files?

From the amannsaini0507-max/jalsetu repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Jalsetu design in my own project?

Yes, under the terms of its MIT license, which amannsaini0507-max chose for the repository.

Can I test firmware for the Jalsetu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards