124 open source boards using the ESP32-WROOM-32D
Real designs built with the ESP32-WROOM-32D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LGPL-2.0291ESP32
KbxIRBlaster
kbx81
69.9 × 66.5 mm86 parts2LCC-BY-SA-4.058ESP32
Iot thing
mortens-lab
80 × 80 mm58 parts4LMIT51ESP32
Openeew sensor
openeew
75 × 50 mm101 parts2LApache-2.049ESP32
POV-Display
Circuit-Digest
208 × 58 mm324 parts2LNo license34ESP32
E-ink screen
TDA-2030
65 × 30 mm55 parts2LApache-2.033ESP32
Sand drawing
tjhowse
54.2 × 81.5 mm27 parts2LCustom license24ESP32
Esp32-aquarium controller
voltlog
122 × 86 mm60 parts2LGPL-3.022ESP32
ImpBox32
AmigaPorts
44 × 40 mm28 parts2LNo license20ESP32
Stacklight hardware
Tyler-Ward
132 × 60 mm115 parts2LCC-BY-SA-4.019ESP32
Paperd ink rev4
paperdink
92.1 × 78.1 mm89 parts2LCC-BY-SA-4.09ESP32
ESP32 Plotter Controller revB1
MarkJB
99.1 × 55.4 mm57 parts2LMIT9ESP32
RadioNoob
EIectron
141.8 × 151.4 mm181 parts2LNo license8ESP32
Hardware
vivian-ng
99.5 × 99.5 mm128 parts2LNo license8ESP32
Final H00 panelicad
Vedatori
240 × 174.3 mm86 parts2LNo license7ESP32
Hw amp
intentfulmotion
61 × 36 mm47 parts2LCERN-OHL-S-2.06ESP32
Petdisk esp32
yo5ptd
75 × 49.8 mm31 parts2LGPL-3.06ESP32
NHK 2024 R2 MD mother
ararobo
100 × 60 mm209 parts4LMIT5ESP32
Ftdi development boards
leonardoward
104 × 81 mm55 parts2LApache-2.05ESP32
Teensy4 esp32 sd usb host breakout
blackketter
22.9 × 55.9 mm33 parts2LNo license5ESP32
Sovereign Bunny Stack
Citrullin
87 × 88.9 mm169 parts4LNo license4ESP32
PaLampa MoBo H00
Vedatori
60 × 100 mm75 parts2LNo license4ESP32
SmartRV-AIO-SMD
RoBro92
108 × 80.8 mm56 parts2LAGPL-3.04ESP32
Data manager
LibreSolar
74 × 38 mm32 parts2LCC-BY-SA-4.04ESP32
ESP32MiniDrop
stasiselectronics
74 × 54 mm25 parts2LCERN-OHL-S-2.04ESP32
ESP32 TOUCH LED
mortens-lab
200 × 200 mm23 parts2LMIT4ESP32
PriusG2
ksmola
147.8 × 65 mm145 parts4LNo license3ESP32
IoT WA - AIO
RWTH-EBC
75 × 44 mm46 parts2LMIT3ESP32
Esp32lcd
cjheath
78 × 44 mm30 parts2LNo license3ESP32
Hexagonal ceiling spot
slimcdk
131.7 × 114.4 mm94 parts2LNo license2ESP32
Eja m
leonardoward
51.2 × 97.5 mm91 parts4LApache-2.02ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LNo license2ESP32
Moles integ dtu hw
the78mole
87 × 68 mm76 parts2LTAPR-OHL-1.02ESP32
Co2-Sensor-Hardware
twam
45 × 65 mm69 parts2LNo license2ESP32
Rj45can power
ppetr
60 × 50 mm44 parts2LApache-2.02ESP32
ESP32-Small-SRWLED
wszeto9
19.6 × 20.3 mm35 parts4LNo license2
How designs wire the ESP32-WROOM-32D
Read from the KiCad layouts of 97 open source designs, one per repository: what each pin of the ESP32-WROOM-32D connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 83 of 97 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCS/CMD pin is left unconnected on 86 of 94 designs (a signal on 8).
- The SWP/SD3 pin is left unconnected on 85 of 94 designs (a signal on 9).
- The SHD/SD2 pin is left unconnected on 84 of 94 designs (a signal on 9).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 15, 38, 39 | Connected to: GND 84% | — |
| VDDpin 2 | Connected to: 3.3V 94% |
|
| ENpin 3 | Connected to: A connector 29% |
|
| SENSOR_VPpin 4 | Connected to: Not connected 62% · a signal 37% | — |
| SENSOR_VNpin 5 | Connected to: Not connected 66% · a signal 32% | — |
| SHD/SD2pin 17 | Connected to: Not connected 89% | — |
| SWP/SD3pin 18 | Connected to: Not connected 90% | — |
| SCS/CMDpin 19 | Connected to: Not connected 91% | — |
| SCK/CLKpin 20 | Connected to: Not connected 89% | — |
| SDO/SD0pin 21 | Connected to: Not connected 89% | — |
| SDI/SD1pin 22 | Connected to: Not connected 88% | — |
| IO0pin 25 | Connected to: A connector 31% |
|
| NCpin 32 | Connected to: Not connected 100% | — |
| IO21pin 33 | Connected to: A connector 38% · not connected 23% |
|
| IO22pin 36 | Connected to: A connector 46% · not connected 19% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartSpin2k by doudar, KbxIRBlaster by kbx81, Iot thing by mortens-lab and Openeew sensor by openeew.
The ESP32-WROOM-32D in open source designs
The gallery holds 124 open source boards using the ESP32-WROOM-32D from 104 GitHub repositories; a typical one measures about 87.7 × 75 mm and carries around 57 components.
79% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is SmartSpin2k Panelized by doudar.
Parts used alongside the ESP32-WROOM-32D
Microcontrollers on boards using the ESP32-WROOM-32D
What boards using the ESP32-WROOM-32D are built for
ESP32-WROOM-32D: common questions
Where can I find a ESP32-WROOM-32D reference design?
Each of the 124 boards on this page is a real design using the ESP32-WROOM-32D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-WROOM-32D EN pin?
The EN pin has a pull-up to 3.3V on 83 of 97 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32D.
How is the ESP32-WROOM-32D SCS/CMD pin connected?
The SCS/CMD pin is left unconnected on 86 of 94 designs (a signal on 8). Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32D.
How is the ESP32-WROOM-32D SWP/SD3 pin connected?
The SWP/SD3 pin is left unconnected on 85 of 94 designs (a signal on 9). Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32D.
What parts are used alongside the ESP32-WROOM-32D?
The AMS1117-3.3, CH340C, CP2104, USBLC6-2P6 and Si7021-A20 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32D use?
Most are built on ESP32 (124).
How big is a typical board using the ESP32-WROOM-32D?
The median is 87.7 × 75 mm, and 79% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32D?
By GitHub stars, SmartSpin2k Panelized by doudar, with 291 stars.
Can I simulate one of these boards using the ESP32-WROOM-32D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.