Hackclub embassy-4-bit pincode

amansanoj·hackclub-embassy-4-bit-pincode·kicad/4-bit-pincode.kicad_sch

This repository ships a schematic but no board layout.

About the Hackclub embassy-4-bit pincode PCB

Hackclub embassy-4-bit pincode is an open source PCB design by amansanoj, published on GitHub. It is a board, with 25 components from 11 distinct parts.

Other key parts include the 74HC595. By type, the board carries 10 resistors, 5 switches, 4 transistors, 4 diodes, 1 IC and 1 capacitor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A 4-digit sequential passcode lock built on breadboards using a 74HC595 shift register, PN2222 transistors, and diodes. No microcontroller or code. Includes KiCad schematic and BOM.

1. Button 1 (S1) runs +5V through two 1N4007 steering diodes to pulse the clock and pull the serial data line high at the same time. This puts a 1 into the register and arms the first stage. 2. Buttons 2, 3, and 4 do not connect to power directly. Their +5V line is gated through PN2222 NPN transistors controlled by the output of the previous stage. If you press them out of order, the transistor base is sitting at 0V, so pressing the button does nothing. 3. Once all four are pressed in sequence (S1 -> S2 -> S3 -> S4), the 1 bit reaches Q3 and turns on the green LED. 4. An extra PN2222 acts as…

Main components on the Hackclub embassy-4-bit pincode

Hackclub embassy-4-bit pincode bill of materials (BOM)

25 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74HC595
U1
4
PN2222A
Q1, Q2, Q3, Q4
5
SW_Push
SW1, SW2, SW3, SW4, SW5
2
1N4007
D1, D2
1
LED_GREEN
D3
1
LED_RED
D4
1
104
C1
3
10K
10k
R1, R2, R3
4
5.1K
5.1k
R4, R5, R6, R7
2
220
R8, R9
1
1k
R10

Hackclub embassy-4-bit pincode design files

The KiCad project lives in the amansanoj/hackclub-embassy-4-bit-pincode repository on GitHub; these links point at the commit this page was built from.

Hackclub embassy-4-bit pincode: common questions

How many components are on the Hackclub embassy-4-bit pincode?

25 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackclub embassy-4-bit pincode design files?

From the amansanoj/hackclub-embassy-4-bit-pincode repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackclub embassy-4-bit pincode design in my own project?

The repository has no license, so all rights stay with amansanoj. Use it as a reference, and ask the author before reusing the design.

Similar boards