Rusb pd
About the Rusb pd PCB
Rusb pd is an open source PCB design by ambraglow, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 16.5 × 23 mm, with 5 components from 4 distinct parts.
By type, the board carries 3 resistors and 2 connectors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
dc power mod for radios using usb-c connector and usb-pd protocol powering at 12V
Rusb pd bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x05_Counter_Clockwise | PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | USB_C_Plug | USB_C_Receptacle_GCT_USB4115-03-C | P1 |
| 2 | 0 | R_0402_1005Metric | R2, R3 |
| 1 | 22 | R_0402_1005Metric | R6 |
Rusb pd design files
The KiCad project lives in the ambraglow/rusb-pd repository on GitHub; these links point at the commit this page was built from.
- Layoutrusb-pd.kicad_pcb
- Schematicrusb-pd.kicad_sch
Rusb pd: common questions
How big is the Rusb pd PCB?
The Rusb pd measures 16.5 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rusb pd?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rusb pd design files?
From the ambraglow/rusb-pd repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rusb pd design in my own project?
Yes, under the terms of its GPL-3.0 license, which ambraglow chose for the repository.
More boards in rusb-pd
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k