HardLabs

Drone bms

AMLing2·MAS500_Drone_Arena·pcb/drone_bms/drone_bms.kicad_pcb

Drone bms PCB layout, top view — open source AVR/Arduino board by AMLing2

About the Drone bms PCB

Drone bms is an open source AVR/Arduino PCB design by AMLing2, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 10 mm, with 4 components from 4 distinct parts.

Its main chip is the TPD2EUSB30, from the AVR/Arduino family. Other key parts include the SN74LVC1G07DCKR, BQ51051BRHL and ATMEGA32U4RC-MUR.

It belongs with the robotics & motion and power & battery designs in this gallery.

Main components on the Drone bms

SN74LVC1G07DCKRTPD2EUSB30BQ51051BRHLATMEGA32U4RC-MUR

Drone bms bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74LVC1G07DCKR
BQ76905RGR
U1
1
TPD2EUSB30
ATmega168PA-MM
U2
1
BQ51051BRHL
U3
1
ATMEGA32U4RC-MUR
TLV61048
U4

Drone bms design files

The KiCad project lives in the AMLing2/MAS500_Drone_Arena repository on GitHub; these links point at the commit this page was built from.

Drone bms: common questions

What microcontroller does the Drone bms use?

The Drone bms is built around the TPD2EUSB30, from the AVR/Arduino family.

How big is the Drone bms PCB?

The Drone bms measures 20 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Drone bms?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Drone bms design files?

From the AMLing2/MAS500_Drone_Arena repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Drone bms design in my own project?

Yes, under the terms of its MIT license, which AMLing2 chose for the repository.

Can I test firmware for the Drone bms without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MAS500_Drone_Arena

Similar boards