HardLabs

PacSat JTAG RevA

AMSAT-NA·PacSatDocs·Hardware/PacSat_JTAG_RevA_KICAD/PacSat_JTAG_RevA.kicad_pcb

PacSat JTAG RevA PCB layout, top view — open source board by AMSAT-NA
Simulate this board

About the PacSat JTAG RevA PCB

PacSat JTAG RevA is an open source PCB design by AMSAT-NA, published on GitHub. It is a 2-layer board measuring 28.1 × 29.8 mm, with 19 components from 8 distinct parts.

By type, the board carries 12 resistors, 6 connectors and 1 capacitor.

It belongs with the usb & debug tools designs in this gallery.

PacSat JTAG RevA bill of materials (BOM)

19 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_02X05
J1
1
CONN_02X05
J2
2
Conn_01x05_Pin
J3, J4
2
Conn_01x10_Pin
J5, J6
1
.1u
C1
2
100
R1, R12
7
5.1K
R2, R3, R5, R8, R9, R10, R11
3
22
R4, R6, R7

PacSat JTAG RevA design files

The KiCad project lives in the AMSAT-NA/PacSatDocs repository on GitHub; these links point at the commit this page was built from.

PacSat JTAG RevA: common questions

How big is the PacSat JTAG RevA PCB?

The PacSat JTAG RevA measures 28.1 × 29.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PacSat JTAG RevA?

19 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PacSat JTAG RevA design files?

From the AMSAT-NA/PacSatDocs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PacSat JTAG RevA design in my own project?

The repository has no license, so all rights stay with AMSAT-NA. Use it as a reference, and ask the author before reusing the design.

More boards in PacSatDocs

Similar boards