Py32f002bf15p6
amwales-888·py32f002bf15p6·Hardware/py32f002bf15p6/KiCAD/py32f002bf15p6.kicad_pcb
About the Py32f002bf15p6 PCB
Py32f002bf15p6 is an open source PCB design by amwales-888, published on GitHub under the MIT license. It is a 2-layer board measuring 45.7 × 22.9 mm, with 24 components from 17 distinct parts.
Other key parts include the CH340K, AP2114HA-3.3TRG1 and PY32F002BF15P6. By type, the board carries 6 capacitors, 5 resistors, 4 connectors, 3 ICs, 2 LEDs and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Simple breakout board for py32f002bf15p6
- 3.3v LDO powered from 5V USB. - UART connectivity to USB via ch340 optionally connected to pins PA6/PA7 using jumpers. - ARM SWD programming interface header. - All other pins are broken out to headers. - 1 LED optionally connected to pin PB4 using jumper. - 1 Button with pulldown optionally connected to pin PB5 using jumper. - 1 Button connected to RESET pin, pulled high.

Main components on the Py32f002bf15p6
Py32f002bf15p6 bill of materials (BOM)
24 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | AP2114HA-3.3TRG1 | SOT-223_DIO | U3 |
| 1 | PY32F002BF15P6 py32f002bf15p6 | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | 16Mhz Crystal | CDFN-4_2.5x3.2mm_P2.1mm | Y1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 2 | CONN_01X13_PIN Conn_01x13_Pin | PinHeader_1x13_P2.54mm_Vertical | J6, J7 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J8 |
| 1 | SW_Push | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | RESET1 |
| 1 | SW_Push | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW0 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED0, PWR1 |
| 1 | TB6612FNG | D_SOD-323 | D1 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 2 | 4.7UF 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 18PF 18pF | C_0603_1608Metric | C6, C7 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 2K2 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 2 | 200R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
Py32f002bf15p6 design files
The KiCad project lives in the amwales-888/py32f002bf15p6 repository on GitHub; these links point at the commit this page was built from.
Py32f002bf15p6: common questions
How big is the Py32f002bf15p6 PCB?
The Py32f002bf15p6 measures 45.7 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Py32f002bf15p6?
24 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Py32f002bf15p6 design files?
From the amwales-888/py32f002bf15p6 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Py32f002bf15p6 design in my own project?
Yes, under the terms of its MIT license, which amwales-888 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979