67 open source boards using the CH340K
Real designs built with the CH340K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Smartdisplay hardware
BearLaboratory
83.2 × 40 mm46 parts2LGPL-3.0175ESP32
LiteWingV2.5C
jobitjoseph
100 × 100 mm76 parts2LCC-BY-NC-4.054ESP32
POV-Display
Circuit-Digest
208 × 58 mm324 parts2LNo license34ESP32
IndiaNavi
theBrutzler
111.7 × 137 mm101 parts4LNo license10ESP32
EL6170 Pro Max Plus
jsjsjsjsjsjsjson
128 × 70.5 mm159 parts2LNo license7ESP32
Eumesmo 24V 16xIn/16xOut/1-Wire Module
thermseekr
128 × 67.8 mm320 parts4LCC-BY-NC-4.06RP2040/RP2350
Progcc 3.2 main
HandHeldLegend
110.9 × 59.8 mm128 parts4LNo license6ESP32
NHK 2024 R2 MD mother
ararobo
100 × 60 mm209 parts4LMIT5ESP32
Kv4p ht-MagSafe
bi4wms
54.5 × 74.8 mm72 parts2LNo license3- schematic only · 29 parts
USB-to-UART-with-CH340K
ampnics
29 partsNo license3 ESP32
Kami hardware
Nicolai-Electronics
95 × 86 mm100 parts4LCERN-OHL-P-2.02ESP32
Why2025
ranzbak
114.9 × 129.9 mm327 parts4LNo license1ESP32
Intelligent-Traffic-Simulator
LimesKey
165.5 × 100.5 mm148 parts4LApache-2.01ESP32
Panel
RamRamAndroid
131 × 100 mm83 parts2LNo license1EasyL1105
shabaz123
64.9 × 38.1 mm50 parts2LNo license1Py32f002bf15p6
amwales-888
45.7 × 22.9 mm24 parts2LMIT1ESP32
Davinci-Keyboard
koki0517
380.2 × 121.1 mm233 parts2LNo license0ESP32
ESP32
Tomoshibi-technology
150 × 150 mm224 parts2LMIT0RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0Renesas
Robot trace V1
Yodahl
65 × 45 mm143 parts4LNo license0ESP32
Acestat-Wireless
jobitjoseph
81 × 61 mm134 parts4LNo license0ESP32
ESP32 SMD
syamei0
95 × 72 mm112 parts2LNo license0ESP32
Eumesmo poe-2rl
thermseekr
82.5 × 45 mm105 parts4LCC-BY-NC-4.00ESP32
ESP32 Dev V1.0
EmersonEE
100 × 80 mm102 parts4LNo license0AVR/Arduino
Spot-Welder with-MCU
ANSHUMANDOCX
101.4 × 60 mm79 parts2LNo license0ESP32
LiteWingV2.5C
HuynhCongDat1412
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
LiteWingV2.5C
willyb234
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
Lite wing drone
Omern187
100 × 100 mm76 parts2LNo license0ESP32
LiteWingV2.5C
ghostlyd
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
LiteWingV2.5C-without jst
nikhilChandra-coder
100 × 100 mm76 parts2LNo license0ESP32
SENTSOR-ESP32WR32UE
GigaOhms
35.6 × 35.6 mm74 parts4LNo license0ESP32
Drone ESP32
Asaf66
102.9 × 103.7 mm73 parts2LNo license0AVR/Arduino
PCB updi unbricker
k-takata
54 × 47.5 mm65 parts2LNo license0ESP32
Thermal-Camera
Abhey-05
90 × 60 mm56 parts2LNo license0ESP32
ESPBoosted
schoolllex
52.8 × 71.8 mm51 parts2LNo license0MSPM0L1105 Dev Board
sarthakchikte0312
64.9 × 38.1 mm50 parts2LNo license0
How designs wire the CH340K
Read from the KiCad layouts of 52 open source designs, one per repository: what each pin of the CH340K connects to, and the resistors, capacitors and other passives placed on it.
- The V3 pin has a capacitor to GND on 45 of 52 designs, most often 100 nF (then 220 nF).
- The VCC pin has a decoupling capacitor on 41 of 52 designs, most often 100 nF (then 10 µF).
- The CTS pin is left unconnected on 46 of 52 designs (a signal on 6).
- The DTR pin has a series resistor on 23 of 52 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 11 | Connected to: GND 96% | — |
| DTRpin 4 | Connected to: Signal 94% |
|
| CTSpin 5 | Connected to: Not connected 88% | — |
| RTSpin 6 | Connected to: Signal 85% · not connected 15% |
|
| VCCpin 7 | Connected to: 3.3V 92% |
|
| TXDpin 8 | Connected to: The microcontroller 42%, a connector 23% |
|
| RXDpin 9 | Connected to: The microcontroller 42%, a connector 27% |
|
| V3pin 10 | Connected to: Signal 63% · 3.3V 33% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smartdisplay hardware by BearLaboratory, RX140 board by hirakuni45, LieWingV2.6.C by jobitjoseph and POV-Display by Circuit-Digest.
The CH340K in open source designs
The gallery holds 67 open source boards using the CH340K from 55 GitHub repositories; a typical one measures about 95 × 67.8 mm and carries around 75 components.
74% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Smartdisplay hardware by BearLaboratory.
Parts used alongside the CH340K
Microcontrollers on boards using the CH340K
What boards using the CH340K are built for
CH340K: common questions
Where can I find a CH340K reference design?
Each of the 67 boards on this page is a real design using the CH340K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CH340K V3 pin connected?
The V3 pin has a capacitor to GND on 45 of 52 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 52 open source designs using the CH340K.
What decoupling capacitors do designs use on the CH340K VCC pin?
The VCC pin has a decoupling capacitor on 41 of 52 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 52 open source designs using the CH340K.
How is the CH340K CTS pin connected?
The CTS pin is left unconnected on 46 of 52 designs (a signal on 6). Counted from the KiCad layouts of 52 open source designs using the CH340K.
What parts are used alongside the CH340K?
The ESP32-S3-WROOM-1, TP4056, 2N27002DW, MPU-6050 and AO3401A appear in the most repositories here.
Which microcontrollers do boards using the CH340K use?
Most are built on ESP32 (43), AVR/Arduino (8), RP2040/RP2350 (3) and Renesas (1).
How big is a typical board using the CH340K?
The median is 95 × 67.8 mm, and 74% are two-layer designs.
What is the most popular open source board using the CH340K?
By GitHub stars, Smartdisplay hardware by BearLaboratory, with 175 stars.
Can I simulate one of these boards using the CH340K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.