Controller board
andia89·MaraXEvolution·controller_board/controller_board.kicad_pcb
About the Controller board
Controller board is an open source AVR/Arduino PCB design by andia89, published on GitHub. It is a 2-layer board measuring 69 × 54 mm, with 73 components from 34 distinct parts.
Its main chip is the ARDUINO_NANO_ESP32, from the AVR/Arduino family. Other key parts include the AQV212, LM4050AEM3-3.0+T, ADS1115IDGS, LM1830N and IE092503-1. By type, the board carries 40 resistors, 13 capacitors, 10 connectors, 5 ICs, 4 transistors and 1 module.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
This repository contains the hardware design and firmware for the MaraX Evolution main controller board. This project is designed to replace the stock controller of the Lelit Mara X espresso machine, adding advanced features such as PID temperature control, pressure profiling, we
This repository contains the hardware design and firmware for the MaraX Evolution main controller board. This project is designed to replace the stock controller of the Lelit Mara X espresso machine, adding advanced features such as PID temperature control, pressure profiling, weighing scale integration, and WiFi connectivity.
controllerboard/: KiCad v6 hardware design files (schematics, PCB layout, and fabrication files). firmware/`: PlatformIO project source code for the ESP32-based controller.
Main components on the Controller board
Controller board bill of materials (BOM)
73 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AQV212 | DIP762W47P254L880H410Q6N | IC1 |
| 1 | LM4050AEM3-3.0+T | SOT95P237X112-3N | IC2 |
| 1 | ADS1115IDGS | VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | LM1830N | PDIP14_19P56X6P35_ONS | U2 |
| 1 | IE092503-1 | IE0925031 | U3 |
| 1 | ARDUINO_NANO_ESP32 Arduino_Nano_ESP32 | Arduino_Nano | A1 |
| 4 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Boiler fill sensor | 280377-2_TYC | CN1 |
| 1 | Water level detector | 280377-2_TYC | CN2 |
| 1 | Sensor steam boiler | 280377-2_TYC | CN3 |
| 1 | Sensor brew boiler | 280377-2_TYC | CN4 |
| 1 | Heater SSR Relay | 280377-2_TYC | CN5 |
| 1 | MISC LEDS | 280389-2_TYC | CN6 |
| 1 | Brew switch | 280377-2_TYC | CN7 |
| 1 | HV Board | PinHeader_1x06_P2.00mm_Vertical | J2 |
| 1 | 705530002 | CONN_705530002_03_MOL | J4 |
| 1 | 705530041 | CONN_70553-xxxx_07_MOL | J5 |
| 4 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C10 |
| 1 | 0.22U 0.22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1NF 1nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.05UF 0.05uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 4 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9, C11 |
| 1 | 47UF 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 20UF 20uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 20 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R7, R9, R10 +12 |
| 2 | 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R29 |
| 1 | 300 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 5K6 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 1K5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 4 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R27, R37, R40 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 1-100K 1-100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 3 | 30K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R19, R21 |
| 6 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R25, R26, R34, R36, R39 |
Controller board design files
The KiCad project lives in the andia89/MaraXEvolution repository on GitHub; these links point at the commit this page was built from.
Controller board: common questions
What microcontroller does the Controller board use?
The Controller board is built around the ARDUINO_NANO_ESP32, from the AVR/Arduino family.
How big is the Controller board?
The Controller board measures 69 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Controller board?
73 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controller board design files?
From the andia89/MaraXEvolution repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controller board design in my own project?
The repository has no license, so all rights stay with andia89. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Controller board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in MaraXEvolution
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k