UnIC Programmer 2
About the UnIC Programmer 2 PCB
UnIC Programmer 2 is an open source PCB design by andrastantos, published on GitHub. It is a 2-layer board measuring 63 × 30 mm, with 60 components from 21 distinct parts.
Other key parts include the FT2232HL, 5M40Z, 93CxxA, MIC5504-1.8YM5 and AMS1117-3.3. By type, the board carries 22 capacitors, 15 resistors, 8 test points, 6 diodes, 5 ICs and 3 connectors.
It belongs with the usb & debug tools designs in this gallery.
Main components on the UnIC Programmer 2
UnIC Programmer 2 bill of materials (BOM)
60 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT2232HL | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | 5M40Z | TQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm | U2 |
| 1 | 93CxxA | SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MIC5504-1.8YM5 | SOT-23-5 | U4 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 1 | RH100-13.560-10-1020-EXT-TR 12MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | 44116B01231 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 502598-2793 Conn_01x27_MountingPin | Molex_502598-2793_2Rows-23P~0.60mm_Horizontal | J2 |
| 1 | Conn_01x27 | PinHeader_2x14_P2.54mm_Vertical | J3 |
| 8 | TestPoint | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | ESDA5V3SC5 | SOT-23-5 | D1, D2, D3, D6 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D5 |
| 19 | 3.3u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C7, C10, C11, C12, C13 +11 |
| 2 | 15p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 4 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R12 |
| 6 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6, R7, R8, R13, R14 |
| 1 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 12k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 2 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
UnIC Programmer 2 design files
The KiCad project lives in the andrastantos/unic repository on GitHub; these links point at the commit this page was built from.
UnIC Programmer 2: common questions
How big is the UnIC Programmer 2 PCB?
The UnIC Programmer 2 measures 63 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UnIC Programmer 2?
60 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UnIC Programmer 2 design files?
From the andrastantos/unic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UnIC Programmer 2 design in my own project?
The repository has no license, so all rights stay with andrastantos. Use it as a reference, and ask the author before reusing the design.
More boards in unic
FPGAUnIC
50 × 15.2 mm197 parts4LNo license6
FPGAUnIC
50 × 15.2 mm197 parts4LNo license6
RP2040/RP2350UnIC
50 × 15.2 mm193 parts4LNo license6
FPGADevel gw1
50.8 × 95.3 mm181 parts2LNo license6
FPGAUnIC
50 × 15.2 mm176 parts4LNo license6
FPGAUnIC
39.9 × 15.2 mm169 parts4LNo license6
FPGAUnIC
29.8 × 15.2 mm133 parts4LNo license6
FPGAUnIC
50 × 15.2 mm113 parts4LNo license6
FPGADip64 gw
49.5 × 15.2 mm112 parts4LNo license6
Unic t13
49.5 × 15.2 mm95 parts4LNo license6
UnIC Progammer
63 × 30 mm61 parts2LNo license6
Similar boards
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Flipper blackhat
o7-machinehum
91 × 53.1 mm167 parts4LCC-BY-NC-4.0292
Relatively-Universal-ROM-Programmer
AndersBNielsen
68.8 × 53.6 mm141 parts2LGPL-3.0253
Ovc5
osrf
98 × 97 mm197 parts6LApache-2.0208
Easy pdk programmer hardware
free-pdk
26.7 × 21.6 mm28 parts2LCC-BY-SA-4.0206
65uino
74.4 × 53.6 mm80 parts2LCustom license165