44 open source boards using the FT2232HL
Real designs built with the FT2232HL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Azukar-FPGA
maxisimonazzi
100 × 75 mm140 parts2LCERN-OHL-P-2.086Ftdi jtag programmer
anthony-bernaert
44 × 64 mm96 parts4LCERN-OHL-P-2.074ESP32
Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049Steppenprobe
diegoherranz
50 × 60 mm75 parts2LCERN-OHL-1.244FPGA
Mainboard
daveshah1
150 × 90 mm709 parts8LMIT40Nordic nRF
AWatch2-hw
jwise
73.4 × 72.7 mm157 parts4LNo license18LCB-CCB-01 LEA Control Board
upb-lea
85 × 55 mm247 parts8LCustom license14FPGA
Pet on a chip
ept221
76.2 × 63.5 mm67 parts4LMIT12Nes dev cart
nesos-dev
100 × 110 mm42 parts4LGPL-3.07SCALES Leviathan V2
BroncoSpace-Lab
100 × 100 mm415 parts6LNo license6FPGA
Vanilla ice40-8k
pbozeman
100 × 62 mm123 parts6LMIT5FPGA
Eth4k hardware
theta-machines
98 × 58 mm132 parts4LCERN-OHL-W-2.04FPGA
LoRaDongle
marrrk
95 × 67 mm125 parts4LNo license4Prog tool
linuxboot
55 × 26.5 mm70 parts2LGPL-3.04FPGA
Xc17 prom prog
msinger
123 × 95 mm281 parts2LCC-BY-SA-4.03Radio usb interface
SP8EBC
127 × 90 mm200 parts2LNo license3FPGA
M1s fpga playground
tomek-szczesny
90 × 65 mm183 parts4LGPL-3.02Development board
inoa-io
153 × 77 mm97 parts2LCERN-OHL-P-2.02FPGA
Bus-Redundancy-Controller
jjgarrid
50 × 50 mm74 parts4LGPL-3.02FPGA
SEM hitachi-
Serhio4522
100 × 70 mm284 parts4LNo license1Pluto jtag adapter
teodor961
53 × 34.2 mm64 parts2LNo license1Hpm6e00evk ethercat motor bridge
joelxue123
146 × 102 mm555 parts4LNo license0FPGA
Zebra-X
Dylanfg123
90 × 60 mm423 parts10LNo license0RP2040/RP2350
FlexLogic EVB
y-suyama
100 × 100 mm306 parts6LApache-2.00RP2040/RP2350
UniDebug
shreyask21
143 × 164 mm273 parts2LNo license0RP2040/RP2350
PCE colorlight carrier
supermomo31
180 × 160 mm253 parts4LNo license0RP2040/RP2350
FT2232H EVB
y-suyama
50 × 50 mm207 parts8LBSD-3-Clause0FPGA
AL-MAWJA
m0-hassan
194 parts4LNo license0RP2040/RP2350
FlexLogicMini EVB
y-suyama
50 × 50 mm176 parts8LBSD-3-Clause0FPGA
Radarriset
faoziaziz
89.2 × 62.4 mm124 parts2LNo license0FT2232-JTAG-UART
thecasterian
30 × 48 mm41 parts2LBSD-3-Clause0ESP32
Endeavour2 upd
petrmikheev
100 × 85 mm238 parts6LGPL-3.049Mariner 1-A
BroncoSpace-Lab
100 × 100 mm235 parts6LNo license6Radioberry juice
OE9SAU
65 × 56 mm87 parts2LNo license4Debugger2
rishabh110493
65 × 30 mm65 parts2LNo license1ESP32
Hubby
cr1tbit
100 × 77 mm212 parts4LNo license0
How designs wire the FT2232HL
Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the FT2232HL connects to, and the resistors, capacitors and other passives placed on it.
- The VPHY pin has a capacitor to GND on 35 of 38 designs, most often 100 nF (then 4.7 µF).
- The VPLL pin has a capacitor to GND on 35 of 38 designs, most often 100 nF (then 4.7 µF).
- The VCORE pins have a decoupling capacitor on 35 of 38 designs, most often 100 nF (then 4.7 µF).
- The VCCIO pins have a decoupling capacitor on 35 of 38 designs, most often 100 nF (then 3.3 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 5, 11, 15, 25, 35, 47, 51 | Connected to: GND 100% | — |
| OSCIpin 2 | Connected to: Signal 100% |
|
| OSCOpin 3 | Connected to: Signal 82% · not connected 18% |
|
| VPHYpin 4 | Connected to: Signal 79% · 3.3V 18% |
|
| REFpin 6 | Connected to: Signal 95% |
|
| VPLLpin 9 | Connected to: Signal 79% · 3.3V 18% |
|
| AGNDpin 10 | Connected to: GND 100% | — |
| VCOREpin 12, 37, 64 | Connected to: 1.8V 55% · a signal 42% |
|
| TESTpin 13 | Connected to: GND 95% | — |
| RESETpin 14 | Connected to: Signal 92% |
|
| VCCIOpin 20, 31, 42, 56 | Connected to: 3.3V 92% |
|
| ADBUS5pin 22 | Connected to: Not connected 61% · a signal 39% | — |
| ACBUS0pin 26 | Connected to: Not connected 74% · a signal 26% | — |
| ACBUS1pin 27 | Connected to: Not connected 71% · a signal 29% | — |
| ACBUS2pin 28 | Connected to: Not connected 71% · a signal 29% | — |
| ACBUS3pin 29 | Connected to: Not connected 76% · a signal 24% | — |
| ACBUS4pin 30 | Connected to: Not connected 76% · a signal 24% | — |
| ACBUS5pin 32 | Connected to: Not connected 68% · a signal 32% | — |
| ACBUS6pin 33 | Connected to: Not connected 74% · a signal 26% | — |
| ACBUS7pin 34 | Connected to: Not connected 89% | — |
| SUSPENDpin 36 | Connected to: Not connected 89% | — |
| BDBUS4pin 43 | Connected to: Not connected 63% · a signal 37% | — |
| BDBUS5pin 44 | Connected to: Not connected 82% · a signal 18% | — |
| BDBUS6pin 45 | Connected to: Not connected 82% · a signal 18% | — |
| BDBUS7pin 46 | Connected to: Not connected 87% | — |
| BCBUS0pin 48 | Connected to: Not connected 87% | — |
| VREGOUTpin 49 | Connected to: 1.8V 50% · a signal 42% |
|
| VREGINpin 50 | Connected to: 3.3V 82% |
|
| BCBUS1pin 52 | Connected to: Not connected 89% | — |
| BCBUS2pin 53 | Connected to: Not connected 89% | — |
| BCBUS5pin 57 | Connected to: Not connected 95% | — |
| BCBUS6pin 58 | Connected to: Not connected 95% | — |
| BCBUS7pin 59 | Connected to: Not connected 87% | — |
| PWRENpin 60 | Connected to: Not connected 82% · a signal 18% | — |
| EEDATApin 61 | Connected to: Signal 89% |
|
| EECLKpin 62 | Connected to: Signal 92% |
|
| EECSpin 63 | Connected to: Signal 92% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Radioberry juice by pa3gsb, Azukar-FPGA by maxisimonazzi, Ftdi jtag programmer by anthony-bernaert and Endeavour2 by petrmikheev.
The FT2232HL in open source designs
The gallery holds 44 open source boards using the FT2232HL from 39 GitHub repositories; a typical one measures about 90 × 63.5 mm and carries around 129 components.
61% use four copper layers or more, and 48% carry an open source license.
The most starred is Radioberry juice by pa3gsb.
Parts used alongside the FT2232HL
Microcontrollers on boards using the FT2232HL
What boards using the FT2232HL are built for
FT2232HL: common questions
Where can I find a FT2232HL reference design?
Each of the 44 boards on this page is a real design using the FT2232HL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FT2232HL VPHY pin connected?
The VPHY pin has a capacitor to GND on 35 of 38 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 38 open source designs using the FT2232HL.
How is the FT2232HL VPLL pin connected?
The VPLL pin has a capacitor to GND on 35 of 38 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 38 open source designs using the FT2232HL.
What decoupling capacitors do designs use on the FT2232HL VCORE pin?
The VCORE pins have a decoupling capacitor on 35 of 38 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 38 open source designs using the FT2232HL.
What parts are used alongside the FT2232HL?
The 93LC56B, USBLC6-2SC6, ICE40HX4K-TQ144, RP2040 and 93LC56BT-I appear in the most repositories here.
Which microcontrollers do boards using the FT2232HL use?
Most are built on FPGA (14), ESP32 (5), RP2040/RP2350 (5) and Nordic nRF (1).
How big is a typical board using the FT2232HL?
The median is 90 × 63.5 mm, and 39% are two-layer designs.
What is the most popular open source board using the FT2232HL?
By GitHub stars, Radioberry juice by pa3gsb, with 675 stars.
Can I simulate one of these boards using the FT2232HL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.