BLE-Temp-Sensor
andreesc·BLE-Temp-Sensor·Hardware/CatiPCB.kicad_pcb
About the BLE-Temp-Sensor PCB
BLE-Temp-Sensor is an open source ESP32 PCB design by andreesc, published on GitHub. It is a 2-layer board measuring 25.9 × 44.7 mm, with 34 components from 24 distinct parts.
Its main chip is the ESP32-H2-MINI-1-H4, from the ESP32 family. Other key parts include the MCP73831T-2DCI/MC and HDC1080DMBR. By type, the board carries 11 resistors, 10 capacitors, 3 ICs, 3 connectors, 3 switches and 3 diodes.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
Hardware, Firmware, and Mechanical Design Files for a Temperature Sensor Board featuring the HDC1080 sensor and Bluetooth Low Energy (BLE) connectivity.
Main components on the BLE-Temp-Sensor
BLE-Temp-Sensor bill of materials (BOM)
34 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2DCI/MC MCP73831-2-MC | DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U1 |
| 1 | HDC1080DMBR HDC1080 | Texas_PWSON-N6 | U3 |
| 1 | ESP32-H2-MINI-1-H4 ESP32-H2-MINI-1 | ESP32-H2-MINI-1 | U5 |
| 1 | USB4105-GF-A USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | B2B-PH-K-S Bat_Conn | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | 61300411121 UART | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | JS102011SAQN | SW_JS102011SAQN | S1 |
| 1 | PTS810SJK250SMTR LFS BOOT | SW_SPST_PTS810 | SW1 |
| 1 | PTS810SJK250SMTR LFS RESET | SW_SPST_PTS810 | SW2 |
| 1 | TLV75533PDRVR | VREG_TLV75533PDRVR | VR1 |
| 1 | 150060RS75000 RED | LED_0603_1608Metric | D1 |
| 1 | 150060VS75000 GREEN | LED_0603_1608Metric | D2 |
| 1 | TPD1E10B06DPYR | D_SOD-523 | D3 |
| 1 | CL10A106KQ8NNNC 10uF | C_0603_1608Metric | C1 |
| 4 | CC0603KRX7R7BB104 0.1uF | C_0603_1608Metric | C2, C4, C5, C10 |
| 3 | CC0603KRX7R7BB105 1uF | C_0603_1608Metric | C3, C6, C7 |
| 2 | CL10B475KQ8NQNC 4.7uF | C_0603_1608Metric | C8, C9 |
| 2 | RC0603FR-0710KL 10KΩ | R_0603_1608Metric | R1, R10 |
| 2 | RC0603FR-074K7L 4.7KΩ | R_0603_1608Metric | R2, R3 |
| 2 | RC0603FR-07470RL 470Ω | R_0603_1608Metric | R4, R8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC0603FR-075K1L 5.1KΩ | R_0603_1608Metric | R5, R6 |
| 1 | RC0603FR-07470KL 470KΩ | R_0603_1608Metric | R7 |
| 1 | RC0603FR-072KL 2KΩ | R_0603_1608Metric | R9 |
| 1 | RC0603FR-07100KL 100KΩ | R_0603_1608Metric | R11 |
BLE-Temp-Sensor design files
The KiCad project lives in the andreesc/BLE-Temp-Sensor repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/CatiPCB.kicad_pcb
- SchematicHardware/CatiPCB.kicad_sch
BLE-Temp-Sensor: common questions
What microcontroller does the BLE-Temp-Sensor use?
The BLE-Temp-Sensor is built around the ESP32-H2-MINI-1-H4, from the ESP32 family.
How big is the BLE-Temp-Sensor PCB?
The BLE-Temp-Sensor measures 25.9 × 44.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BLE-Temp-Sensor?
34 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the BLE-Temp-Sensor design files?
From the andreesc/BLE-Temp-Sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BLE-Temp-Sensor design in my own project?
The repository has no license, so all rights stay with andreesc. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BLE-Temp-Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k