In car dashboard
andreiii04·in-car-dashboard·hardware/pcb/in_car_dashboard.kicad_pcb
About the In car dashboard PCB
In car dashboard is an open source STM32 PCB design by andreiii04, published on GitHub under the MIT license. It is a 4-layer board measuring 61.6 × 95.8 mm, with 51 components from 28 distinct parts.
Its main chip is the STM32F446RCT6, from the STM32 family. Other key parts include the MCP1825ST-3302E/DB, LSM6DSOTR, BME680, L76L-M33 and GPS ANT-1 Chip. By type, the board carries 22 capacitors, 8 connectors, 8 resistors, 6 ICs, 2 diodes and 1 crystal.
It belongs with the sensors, rf & radio and displays & leds designs in this gallery.
From the project
Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.
A standalone telemetry display for a car: a custom 4-layer STM32 board with a 2.8" TFT, a 6-axis IMU, an environmental sensor and a GPS module. It powers from the car's 12 V socket through an ordinary USB-C car charger, starts a fresh session on every power-on with no buttons, shows live driving numbers, and writes a summary of each drive to an SD card.
Live, on the screen - A G-meter: a dot for the acceleration you feel, its magnitude, and the session's hardest braking, acceleration and cornering each way around the ring - Speed, session maximum and distance (GPS) - Temperature, humidity…

Main components on the In car dashboard
In car dashboard bill of materials (BOM)
51 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1825ST-3302E/DB MCP1825ST-3302E MICROCHIP | SOT-223-3_TabPin2 | U1 |
| 1 | LSM6DSOTR ST(意法半导体) | LGA-14_L3.0-W2.5-P0.50-TL | U2 |
| 1 | BME680 Bosch Sensortec | LGA-8_L3.0-W3.0-P0.80-TR | U3 |
| 1 | L76L-M33 Quectel | Quectel_L76 | U4 |
| 1 | GPS ANT-1 Chip | GPS_ANT-1_Chip_SMD | U6 |
| 1 | STM32F446RCT6 STM32F446RCTx STMicroelectronics | LQFP-64_10x10mm_P0.5mm | U7 |
| 1 | SJK-7U-12.000-18-30-80-C-30 12MHz SJK | Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | X1 |
| 5 | CH31062V200 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J4, J5, J6 |
| 1 | CH31062V200 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | USB4930-00-A USB4930-00-A_REVA Global Connector Technology | GCT_USB4930-00-A_REVA | J7 |
| 1 | CH31062V200 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 3003 Keystone Electronics | BAT_3003 | BT1 |
| 1 | KMRTM28028-SPI MSP2807 | ILI9341_display | LCD1 |
| 1 | SMBJ5.0A-E3/52 SMBJ5.0A VISHAY(威世) | SMB_L4.6-W3.6-LS5.3-RD | TV1 |
| 1 | PMEG3050EP Nexperia | SMAF_L3.8-W2.5-LS4.7-RD | D1 |
| 1 | PMEG10020AELPX PMEG10020AELP Nexperia | SMAF_L3.8-W2.5-LS4.7-RD | D3 |
| 1 | 39N 39n | L_0603_1608Metric | L1 |
| 1 | 593D227X9010E2TE3 220u Vishay | 220u_tantalum_cap | C1 |
| 2 | CL10A475KQ8NNNC 4u7 Samsung Electro-Mechanics | C_0603_1608Metric | C2, C13 |
| 14 | CL10B104KO8NNNC 100n Samsung Electro-Mechanics | C_0603_1608Metric | C3, C4, C5, C6, C7, C10, C14, C15 +6 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL10A105KP8NNNC 1u Samsung Electro-Mechanics | C_0603_1608Metric | C8 |
| 1 | CL10B103KB8NNNC 10n Samsung Electro-Mechanics | C_0603_1608Metric | C9 |
| 2 | CL10C150JB8NNNC 15p Samsung Electro-Mechanics | C_0603_1608Metric | C11, C12 |
| 1 | CL10A106MA8NRNC 10u Samsung Electro-Mechanics | C_0603_1608Metric | C18 |
| 1 | AC0603JR-0710KL 10k Yageo | R_0603_1608Metric | R1 |
| 2 | RC0603FR-074K7L 4k7 Yageo | R_0603_1608Metric | R2, R3 |
| 3 | RC0603FR-075K1L 5k1 Yageo | R_0603_1608Metric | R4, R5, R8 |
| 2 | RC0603FR-071KL 1k Yageo | R_0603_1608Metric | R6, R7 |
In car dashboard design files
The KiCad project lives in the andreiii04/in-car-dashboard repository on GitHub; these links point at the commit this page was built from.
In car dashboard: common questions
What microcontroller does the In car dashboard use?
The In car dashboard is built around the STM32F446RCT6, from the STM32 family.
How big is the In car dashboard PCB?
The In car dashboard measures 61.6 × 95.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the In car dashboard?
51 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the In car dashboard design files?
From the andreiii04/in-car-dashboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the In car dashboard design in my own project?
Yes, under the terms of its MIT license, which andreiii04 chose for the repository.
Can I test firmware for the In car dashboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k