44 open source boards using the BME680

Real designs built with the BME680, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

44 boardsClear filters|Most starred

How designs wire the BME680

Read from the KiCad layouts of 39 open source designs, one per repository: what each pin of the BME680 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 30 of 39 designs, most often 100 nF (then 4.7 µF).
  • The VDD pin has a decoupling capacitor on 29 of 39 designs, most often 100 nF (then 4.7 µF).
  • The SCK pin has a pull-up to 3.3V on 24 of 39 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDI pin has a pull-up to 3.3V on 23 of 39 designs, most often 10 kΩ (then 4.7 kΩ).
GNDpin 1, 7Connected to: GND 90%
SDIpin 3Connected to: The microcontroller 54%, a connector 26%
  • Pull-up to 3.3V on 59% · 10 kΩ (11), 4.7 kΩ (11), 3.3 kΩ (1)
SCKpin 4Connected to: The microcontroller 51%, a connector 26%
  • Pull-up to 3.3V on 62% · 10 kΩ (12), 4.7 kΩ (10), 3.3 kΩ (2)
VDDIOpin 6Connected to: 3.3V 82%
  • Decoupling capacitor on 77% · 100 nF (51), 4.7 µF (4), 1 µF (2)
VDDpin 8Connected to: 3.3V 90%
  • Decoupling capacitor on 74% · 100 nF (49), 4.7 µF (4), 1 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Womo by muccc, X1 by embeddedalpha, ClimateSprinklerController by kbx81 and EverAliveSensor by jfm92.

The BME680 in open source designs

The gallery holds 44 open source boards using the BME680 from 42 GitHub repositories; a typical one measures about 64 × 62.2 mm and carries around 60 components.

54% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Womo by muccc.

Microcontrollers on boards using the BME680

BME680: common questions

Where can I find a BME680 reference design?

Each of the 44 boards on this page is a real design using the BME680. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BME680 VDDIO pin?

The VDDIO pin has a decoupling capacitor on 30 of 39 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 39 open source designs using the BME680.

What decoupling capacitors do designs use on the BME680 VDD pin?

The VDD pin has a decoupling capacitor on 29 of 39 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 39 open source designs using the BME680.

What pull-up resistor is used on the BME680 SCK pin?

The SCK pin has a pull-up to 3.3V on 24 of 39 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 39 open source designs using the BME680.

What parts are used alongside the BME680?

The BME280, AMS1117-3.3, AP2112K-3.3TRG1, USBLC6-2SC6 and USBLC6-4SC6 appear in the most repositories here.

Which microcontrollers do boards using the BME680 use?

Most are built on ESP32 (21), STM32 (6), Nordic nRF (3) and RP2040/RP2350 (2).

How big is a typical board using the BME680?

The median is 64 × 62.2 mm, and 54% are two-layer designs.

What is the most popular open source board using the BME680?

By GitHub stars, Womo by muccc, with 84 stars.

Can I simulate one of these boards using the BME680 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part