21 open source boards using the LSM6DSOTR

Real designs built with the LSM6DSOTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the LSM6DSOTR

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the LSM6DSOTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 10 µF).
  • The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 10 µF).
  • The OCS_AUX pin is left unconnected on 16 of 16 designs.
  • The SDO_AUX pin is left unconnected on 16 of 16 designs.
SDXpin 2Connected to: GND 75% · not connected 25%
SCXpin 3Connected to: GND 75% · not connected 25%
VDDIOpin 5Connected to: 3.3V 88%
  • Decoupling capacitor on 94% · 100 nF (30), 10 µF (7), 22 µF (1)
GNDpin 6, 7Connected to: GND 100%
VDDpin 8Connected to: 3.3V 88%
  • Decoupling capacitor on 94% · 100 nF (33), 10 µF (7), 1 µF (2)
INT2pin 9Connected to: Not connected 75% · a signal 25%
OCS_AUXpin 10Connected to: Not connected 100%
SDO_AUXpin 11Connected to: Not connected 100%
SCLpin 13Connected to: The microcontroller 69%, a connector 50%
  • Pull-up to 3.3V on 56% · 4.7 kΩ (10)
SDApin 14Connected to: The microcontroller 69%, a connector 50%
  • Pull-up to 3.3V on 56% · 4.7 kΩ (9)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 3117 AUSIGN by r4hulrr, Bwlc1a by teapotlaboratories, In car dashboard by andreiii04 and Senior design strength training by brnna05.

The LSM6DSOTR in open source designs

The gallery holds 21 open source boards using the LSM6DSOTR from 16 GitHub repositories; a typical one measures about 67.1 × 70 mm and carries around 103 components.

81% use four copper layers or more, and 29% carry an open source license.

The most starred is 3117 AUSIGN by r4hulrr.

Microcontrollers on boards using the LSM6DSOTR

LSM6DSOTR: common questions

Where can I find a LSM6DSOTR reference design?

Each of the 21 boards on this page is a real design using the LSM6DSOTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSOTR VDDIO pin?

The VDDIO pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 16 open source designs using the LSM6DSOTR.

What decoupling capacitors do designs use on the LSM6DSOTR VDD pin?

The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 16 open source designs using the LSM6DSOTR.

How is the LSM6DSOTR OCS_AUX pin connected?

The OCS_AUX pin is left unconnected on 16 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the LSM6DSOTR.

What parts are used alongside the LSM6DSOTR?

The BMP388, L76L-M33, MAX-M10S, MAX-M10S-00B and MCP73831T-2ACI/OT appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSOTR use?

Most are built on RP2040/RP2350 (5), STM32 (4), ESP32 (3) and Nordic nRF (2).

How big is a typical board using the LSM6DSOTR?

The median is 67.1 × 70 mm, and 19% are two-layer designs.

What is the most popular open source board using the LSM6DSOTR?

By GitHub stars, 3117 AUSIGN by r4hulrr, with 3 stars.

Can I simulate one of these boards using the LSM6DSOTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part