USB-Keyboard
andreili·USB-Keyboard·hw/usb_keyb.kicad_pcb
About the USB-Keyboard PCB
USB-Keyboard is an open source STM32 PCB design by andreili, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 99.1 × 99.4 mm, with 107 components from 34 distinct parts.
Its main chip is the STM32F407VETx, from the STM32 family. Other key parts include the LM3671MF, STMPS2161STR, NUP4201MR6 and 74LS245. By type, the board carries 62 resistors, 19 capacitors, 11 connectors, 5 ICs, 3 switches and 3 diodes.
It belongs with the keyboards and retro computing designs in this gallery.
From the project
Adapter for connect a USB keyboards and mouse to retro PC
Main components on the USB-Keyboard
USB-Keyboard bill of materials (BOM)
107 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3671MF | SOT-23-5 | U1 |
| 1 | STM32F407VETx | LQFP-100_14x14mm_Pitch0.5mm | U2 |
| 1 | STMPS2161STR | SOT-23-5 | U3 |
| 1 | NUP4201MR6 | TSOT-23-6 | U4 |
| 1 | 74LS245 | SOIC-20W_7.5x12.8mm_Pitch1.27mm | U5 |
| 1 | 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Micro_SD_Card | Conn_uSDcard | J2 |
| 1 | USB_1 | conn_usb_Ax2 | J3 |
| 1 | ZX-BUS | Socket_DIN41612-CaseC1-AB-Female-56Pin-2rows | J4 |
| 1 | I2C | Socket_Strip_Straight_1x04_Pitch2.54mm | J7 |
| 1 | UART | Socket_Strip_Straight_1x04_Pitch2.54mm | J8 |
| 1 | PROG | Socket_Strip_Straight_2x02_Pitch2.00mm | J9 |
| 1 | SPI | Socket_Strip_Straight_1x06_Pitch2.54mm | J10 |
| 1 | RMII | Socket_Strip_Straight_2x10_Pitch2.54mm | J11 |
| 1 | PS2 | Socket_Strip_Straight_1x04_Pitch2.54mm | J12 |
| 1 | OUT_JMP | Pin_Header_Straight_1x03_Pitch2.54mm | J13 |
| 1 | MTX_JMP | Pin_Header_Straight_1x08_Pitch2.54mm | J14 |
| 2 | DLW21SN371SQ2 | DLW21S | FL1, FL2 |
| 1 | RESET | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | OUTPUT | SW_DIP_x3_W7.62mm_Slide | SW2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MATRIX | SW_DIP_x8_W7.62mm_Slide | SW3 |
| 1 | L1 | LED_0805 | D1 |
| 1 | L2 | LED_0805 | D2 |
| 1 | ERR | LED_0805 | D3 |
| 1 | 2.2µH | L_Vishay_IHLP-1616 | L1 |
| 2 | 100u | CP_Elec_5x5.7 | C1, C2 |
| 11 | 100n | C_0805 | C3, C4, C5, C6, C7, C8, C9, C10 +3 |
| 1 | 10uF | CP_Tantalum_Case-A_EIA-3216-18_Reflow | C13 |
| 2 | 22pF | C_0805 | C14, C15 |
| 1 | 4,7uF | CP_Tantalum_Case-A_EIA-3216-18_Reflow | C17 |
| 2 | 2,2u | C_0402 | C18, C19 |
| 57 | 10k | R_0805 | R1, R2, R3, R4, R5, R6, R7, R8 +49 |
| 1 | 0 | R_0805 | R10 |
| 4 | 22 | R_0402 | R14, R15, R16, R17 |
USB-Keyboard design files
The KiCad project lives in the andreili/USB-Keyboard repository on GitHub; these links point at the commit this page was built from.
- Layouthw/usb_keyb.kicad_pcb
USB-Keyboard: common questions
What microcontroller does the USB-Keyboard use?
The USB-Keyboard is built around the STM32F407VETx, from the STM32 family.
How big is the USB-Keyboard PCB?
The USB-Keyboard measures 99.1 × 99.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB-Keyboard?
107 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-Keyboard design files?
From the andreili/USB-Keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the USB-Keyboard design in my own project?
Yes, under the terms of its GPL-3.0 license, which andreili chose for the repository.
Can I test firmware for the USB-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k