Sticks3 adapter
About the Sticks3 adapter PCB
Sticks3 adapter is an open source PCB design by AndreiVladescu, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 30 × 58.2 mm, with 3 components from 2 distinct parts.
From the project
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
ESP32-Bit-Pirate-Dock is an open-source carrier board for the Espressif ESP32-S3 DevKit, designed to complement the ESP32-Bit-Pirate firmware by geo-tp.
It provides level and voltage translation between the 3.3V ESP32-S3 and external peripherals, with support for 1.8V, 3.3V, and 5V operation. See the Hardware status section for the current revision, and grab the fabrication files to build your own.
Sticks3 adapter bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x22 | PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Horizontal | J3 |
Sticks3 adapter design files
The KiCad project lives in the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub; these links point at the commit this page was built from.
Sticks3 adapter: common questions
How big is the Sticks3 adapter PCB?
The Sticks3 adapter measures 30 × 58.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sticks3 adapter?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sticks3 adapter design files?
From the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sticks3 adapter design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which AndreiVladescu chose for the repository.
More boards in ESP32-Bit-Pirate-Hardware
ESP32 Bus Pirate Dock
80 × 73.8 mm33 parts4LCERN-OHL-W-2.076
Flash adapter
41.2 × 43.5 mm15 parts2LCERN-OHL-W-2.076
C5 adapter
50 × 45 mm6 parts2LCERN-OHL-W-2.076
TemplateAdapters
29.2 × 57.4 mm5 parts2LCERN-OHL-W-2.076
Atoms3lite adapter
29.2 × 57.4 mm5 parts2LCERN-OHL-W-2.076
Wifilorav4 adapter
34.4 × 57.1 mm4 parts2LCERN-OHL-W-2.076
Stamps3 adapter
30 × 58.1 mm4 parts2LCERN-OHL-W-2.076
T190 adapter
35 × 60.6 mm4 parts2LCERN-OHL-W-2.076
Xiaos3 adapter
30.1 × 57.4 mm4 parts2LCERN-OHL-W-2.076