TemplateAdapters
About the TemplateAdapters PCB
TemplateAdapters is an open source PCB design by AndreiVladescu, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 29.2 × 57.4 mm, with 5 components from 4 distinct parts.
By type, the board carries 4 connectors and 1 switch.
From the project
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
- Copy the templateAdapters directory in your KICADUSERTEMPLATEDIR** - It will then be displayed in the template list when you create a new project (The template is easy to identify with the Bit Pirate logo).
1. this part is the interface with the dock. It shows all the IOs that the are exposed to the adapter. By default all the IOs but the 8 ones that are routed to the outside of the dock and the power supplies are tagged as not used. This part is not supposed to be modified. 2. this part is the interface of the device to be connected to the Dock. All the necessary connectors must be added…
TemplateAdapters bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x22 | PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x09_Socket | PinSocket_1x09_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SW_SPST_PTS645Sx43SMTR92 | SW1 |
TemplateAdapters design files
The KiCad project lives in the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub; these links point at the commit this page was built from.
TemplateAdapters: common questions
How big is the TemplateAdapters PCB?
The TemplateAdapters measures 29.2 × 57.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TemplateAdapters?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TemplateAdapters design files?
From the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TemplateAdapters design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which AndreiVladescu chose for the repository.
More boards in ESP32-Bit-Pirate-Hardware
ESP32 Bus Pirate Dock
80 × 73.8 mm33 parts4LCERN-OHL-W-2.076
Flash adapter
41.2 × 43.5 mm15 parts2LCERN-OHL-W-2.076
C5 adapter
50 × 45 mm6 parts2LCERN-OHL-W-2.076
Atoms3lite adapter
29.2 × 57.4 mm5 parts2LCERN-OHL-W-2.076
T190 adapter
35 × 60.6 mm4 parts2LCERN-OHL-W-2.076
Xiaos3 adapter
30.1 × 57.4 mm4 parts2LCERN-OHL-W-2.076
Stamps3 adapter
30 × 58.1 mm4 parts2LCERN-OHL-W-2.076
Wifilorav4 adapter
34.4 × 57.1 mm4 parts2LCERN-OHL-W-2.076
Sticks3 adapter
30 × 58.2 mm3 parts2LCERN-OHL-W-2.076