HardLabs

Wifilorav4 adapter

AndreiVladescu·ESP32-Bit-Pirate-Hardware·MCU_adapters/wifilorav4_adapter/wifilorav4_adapter.kicad_pcb

Wifilorav4 adapter PCB layout, top view — open source board by AndreiVladescu
Simulate this board

About the Wifilorav4 adapter PCB

Wifilorav4 adapter is an open source PCB design by AndreiVladescu, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 34.4 × 57.1 mm, with 4 components from 2 distinct parts.

From the project

Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.

ESP32-Bit-Pirate-Dock is an open-source carrier board for the Espressif ESP32-S3 DevKit, designed to complement the ESP32-Bit-Pirate firmware by geo-tp.

It provides level and voltage translation between the 3.3V ESP32-S3 and external peripherals, with support for 1.8V, 3.3V, and 5V operation. See the Hardware status section for the current revision, and grab the fabrication files to build your own.

Wifilorav4 adapter, from the project README
From the project README

Wifilorav4 adapter bill of materials (BOM)

4 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
Conn_01x22
J1, J2
2
Conn_01x18_Socket
J3, J4

Wifilorav4 adapter design files

The KiCad project lives in the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub; these links point at the commit this page was built from.

Wifilorav4 adapter: common questions

How big is the Wifilorav4 adapter PCB?

The Wifilorav4 adapter measures 34.4 × 57.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wifilorav4 adapter?

4 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wifilorav4 adapter design files?

From the AndreiVladescu/ESP32-Bit-Pirate-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Wifilorav4 adapter design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which AndreiVladescu chose for the repository.

More boards in ESP32-Bit-Pirate-Hardware