PS2 ADB
About the PS2 ADB PCB
PS2 ADB is an open source PIC PCB design by androda, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 63.5 × 36.3 mm, with 18 components from 15 distinct parts.
Its main chip is the PIC12F1840-IP, from the PIC family. By type, the board carries 6 capacitors, 4 connectors, 2 fuses, 2 diodes, 2 resistors and 1 IC.
From the project
PCB Designs By Androda
This PCB is licensed Creative Commons Attribution-NonCommercial-ShareAlike 4.0. https://creativecommons.org/licenses/by-nc-sa/4.0/
Software is licensed GPLV3 from Tashtari/lampmerchant: https://github.com/lampmerchant/tashtrio
Main components on the PS2 ADB
PS2 ADB bill of materials (BOM)
18 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC12F1840-IP | DIP-8_W7.62mm | U1 |
| 1 | KBD | PS2_MDR6_MINI-DIN | J2 |
| 1 | MOUSE | PS2_MDR6_MINI-DIN | J3 |
| 1 | DIN-4 | ADB_MDR4_MINI-DIN | J4 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Fuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | Fuse | Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mm | F2 |
| 1 | SW_MEC_5E | SW_SPST_TL3305A | SW1 |
| 1 | D | D_DO-15_P12.70mm_Horizontal | D1 |
| 1 | D | D_SMA | D2 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4 |
| 1 | 4.7uF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 2 | 4.7uF | CP_Radial_D5.0mm_P2.50mm | C5, C6 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
PS2 ADB design files
The KiCad project lives in the androda/PCBDesigns repository on GitHub; these links point at the commit this page was built from.
PS2 ADB: common questions
What microcontroller does the PS2 ADB use?
The PS2 ADB is built around the PIC12F1840-IP, from the PIC family.
How big is the PS2 ADB PCB?
The PS2 ADB measures 63.5 × 36.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PS2 ADB?
18 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS2 ADB design files?
From the androda/PCBDesigns repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PS2 ADB design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the PS2 ADB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in PCBDesigns
XCVR F1 SMD V1
89.7 × 87.8 mm46 parts2LCC-BY-NC-4.021
LC Generic Power Supply
49.8 × 52.7 mm28 parts2LCC-BY-NC-4.021
PowerBook V4
68.2 × 50.6 mm25 parts2LCC-BY-NC-4.021
STM32DefCon31 HeatIndex BadgeAddon
39.1 × 90.6 mm19 parts2LCC-BY-NC-4.021
MacPortable THTV1
57.2 × 75.7 mm12 parts2LCC-BY-NC-4.021
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376