HardLabs

Sensing-Board

Angelussss·Ducker-Charger·PCB/Sensing-Board/Sensing-Board.kicad_pcb

Sensing-Board layout, top view — open source board by Angelussss

About the Sensing-Board

Sensing-Board is an open source PCB design by Angelussss, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 70.5 × 99 mm, with 5 components from 2 distinct parts.

It belongs with the power & battery designs in this gallery.

From the project

an open source custom power bank

Two KiCad projects make up the Ducker-Charger hardware:

Component datasheets and technical reference manuals used during the design are collected in Ducker-Charger/docs/.

Bus-level detail (pins, addresses): docs/hardware/BSPreference.md`.

/production/ holds the fabrication outputs (gerber zip + IPC netlist) generated with the JLCPCB fabrication toolkit. Regenerate after any layout change; do not hand-edit.

Sensing-Board bill of materials (BOM)

5 components, 2 distinct parts.

QtyPartRefs
1
Conn_01x08
J403
4
Thermistor_NTC
TH402, TH403, TH404, TH405

Sensing-Board design files

The KiCad project lives in the Angelussss/Ducker-Charger repository on GitHub; these links point at the commit this page was built from.

Sensing-Board: common questions

How big is the Sensing-Board?

The Sensing-Board measures 70.5 × 99 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensing-Board?

5 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sensing-Board design files?

From the Angelussss/Ducker-Charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sensing-Board design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in Ducker-Charger

Similar boards