Msp430-breakout
anilv8·msp430-breakout
About the Msp430-breakout
Msp430-breakout is an open source TI MSP430/CC PCB design by anilv8, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30 × 43.6 mm, with 15 components from 11 distinct parts.
Its main chip is the MSP430G2553IPW20, from the TI MSP430/CC family. Other key parts include the AMS1117-3.3. By type, the board carries 4 capacitors, 3 connectors, 3 resistors, 2 ICs, 2 diodes and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Simple MSP430 Breakout board designed using KiCad
Main components on the Msp430-breakout
Msp430-breakout bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSP430G2553IPW20 | DIP-20_W7.62mm_Socket | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 1 | USB_B_Mini | USB_Mini-B_Wuerth_65100516121_Horizontal | J3 |
| 1 | SW_Push | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 2 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Msp430-breakout design files
The KiCad project lives in the anilv8/msp430-breakout repository on GitHub; these links point at the commit this page was built from.
- Layoutmsp430-breakout.kicad_pcb
- Schematicmsp430-breakout.kicad_sch
Msp430-breakout: common questions
What microcontroller does the Msp430-breakout use?
The Msp430-breakout is built around the MSP430G2553IPW20, from the TI MSP430/CC family.
How big is the Msp430-breakout?
The Msp430-breakout measures 30 × 43.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Msp430-breakout?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Msp430-breakout design files?
From the anilv8/msp430-breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Msp430-breakout design in my own project?
Yes, under the terms of its GPL-3.0 license, which anilv8 chose for the repository.
Can I test firmware for the Msp430-breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021