MicroController Project

anmh1205·MicroController_Project·2. PCB/V1/V1.kicad_pcb

MicroController Project PCB layout, top view — open source PIC board by anmh1205

About the MicroController Project PCB

MicroController Project is an open source PIC PCB design by anmh1205, published on GitHub. It is a 2-layer board measuring 80 × 65 mm, with 37 components from 21 distinct parts.

Its main chip is the PIC16F887-I/PT, from the PIC family. Other key parts include the CH340G. By type, the board carries 13 resistors, 7 capacitors, 6 switches, 3 connectors, 2 ICs and 2 crystals.

Main components on the MicroController Project

PIC16F887-I/PTCH340G

MicroController Project bill of materials (BOM)

37 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PIC16F887-I/PT
PIC16F887-I_PT
U1
1
CH340G
U2
1
S8550
Q1
2
12MHZ
12MHz
Y1, Y2
1
LCD I2C
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2
1
CONN_01X05_SOCKET
Conn_01x05_Socket
J4
1
Buzzer
BZ1
1
RESET
SW1
5
SW_Push
SW2, SW3, SW4, SW5, SW6
1
POWER
D1
1
MORSE
D2
4
22P
22p
C1, C2, C6, C7
1
10UF
10uF
C3
1
100NF
100nF
C4
1
100N
100n
C5
2
5.1K
R1, R2
6
10K
R3, R7, R8, R9, R10, R11
2
330
R4, R13
2
4.7K
4.7k
R5, R6
Show 1 more
QtyPartRefs
1
1K
R12

MicroController Project design files

The KiCad project lives in the anmh1205/MicroController_Project repository on GitHub; these links point at the commit this page was built from.

MicroController Project: common questions

What microcontroller does the MicroController Project use?

The MicroController Project is built around the PIC16F887-I/PT, from the PIC family.

How big is the MicroController Project PCB?

The MicroController Project measures 80 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MicroController Project?

37 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MicroController Project design files?

From the anmh1205/MicroController_Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MicroController Project design in my own project?

The repository has no license, so all rights stay with anmh1205. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MicroController Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards