AutoCut-Charger
ANSHUMANDOCX·AutoCut-Charger·PCB/12v autocut charger.kicad_pcb
About the AutoCut-Charger PCB
AutoCut-Charger is an open source PCB design by ANSHUMANDOCX, published on GitHub. It is a 2-layer board measuring 83.2 × 40.6 mm, with 23 components from 21 distinct parts.
Other key parts include the LM317_TO-220. By type, the board carries 5 diodes, 5 resistors, 4 capacitors, 2 transistors, 2 connectors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Its a Autocut charger to charge a 12v Lead Acid Battery
Main components on the AutoCut-Charger
AutoCut-Charger bill of materials (BOM)
23 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 1 | MJE2955 | TO-220-3_Vertical | Q1 |
| 1 | BC547 | TO-92_Inline | Q2 |
| 1 | Conn_01x03_Socket | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1 |
| 1 | Conn_01x02_Socket | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | G5LE-1 | Relay_SPDT_Omron-G5LE-1 | K1 |
| 2 | 10K | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | RESTART | SW_PUSH_6mm | SW1 |
| 1 | GBU1508A-B1-0000 | GBU_4P-L22.0-W3.6-P5.08 | D1 |
| 1 | D | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 10A | D_P600_R-6_P20.00mm_Horizontal | D3 |
| 1 | CHRG | LED_D3.0mm | D4 |
| 1 | FULL | LED_D3.0mm | D5 |
| 2 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 1 | 100nf | C_Rect_L7.2mm_W2.5mm_P5.00mm | C3 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
AutoCut-Charger design files
The KiCad project lives in the ANSHUMANDOCX/AutoCut-Charger repository on GitHub; these links point at the commit this page was built from.
AutoCut-Charger: common questions
How big is the AutoCut-Charger PCB?
The AutoCut-Charger measures 83.2 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AutoCut-Charger?
23 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AutoCut-Charger design files?
From the ANSHUMANDOCX/AutoCut-Charger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AutoCut-Charger design in my own project?
The repository has no license, so all rights stay with ANSHUMANDOCX. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k