USB-C-AUDIO-HUB

ANSHUMANDOCX·USB-C-AUDIO-HUB·PCB/USB HUB+AUDIO.kicad_pcb

USB-C-AUDIO-HUB PCB layout, top view — open source board by ANSHUMANDOCX

About the USB-C-AUDIO-HUB PCB

USB-C-AUDIO-HUB is an open source PCB design by ANSHUMANDOCX, published on GitHub. It is a 2-layer board measuring 64.2 × 33.6 mm, with 55 components from 27 distinct parts.

Other key parts include the PCM2912APJTR, SL2.1A and PJ-320A-4P DIP. By type, the board carries 20 capacitors, 20 resistors, 6 connectors, 3 ICs, 2 diodes and 1 crystal.

It belongs with the audio and usb & debug tools designs in this gallery.

From the project

This is a USB C Hub which had a Audio IN/OUT Along with 3 USB ports.

- It has 3 downstream USB-C ports and 1 USB-C input so we can connect any desired length of cable we want to use with it - TRRS audio jack for headphones with integrated microphone along with a mute/unmute switch built into the hub ## Usage guide - using it is as simple as it can be you just need to plug into the single usb C on the side and connected it to your device there are no driver needed - It doesnt need any firmware flashing - Its compatible with windows and linux ## Assembly guide All you need to do is place the PCB at the base plate align the holes and place the Body on top of it…

USB-C-AUDIO-HUB, from the project README
From the project README

Main components on the USB-C-AUDIO-HUB

PCM2912APJTRSL2.1APJ-320A-4P DIP

USB-C-AUDIO-HUB bill of materials (BOM)

55 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCM2912APJTR
U1
1
SL2.1A
U2
1
PJ-320A-4P DIP
U3
1
6Mhz
Y1
4
USB_C_Receptacle_USB2.0_16P
J1, J2, J3, J7
1
Conn_01x03_Pin
J9
1
Conn_01x02_Pin
J10
1
1uF
Cc14
1
XKB5858-Z-80
SW2
1
REC
D1
1
PLAY
D2
1
1uH
L1
5
1uF
C1, C8, C11, C17, C18
2
20pf
C2, C3
2
100pf
C4, C5
2
3.3uF
C6, C10
1
0.1uF
C7
1
0.22uF
C9
2
10uF
C12, C14
2
100uF
C13, C16
Show 7 more
QtyPartRefs
3
C_Polarized
C15, C19, C20
7
22R
R1, R2, R5, R7, R8, R10, R11
1
1.5k
R3
1
1M
R4
8
5.1k
R6, R9, R14, R15, R16, R17, R18, R19
2
820R
R12, R13
1
0
R20

USB-C-AUDIO-HUB design files

The KiCad project lives in the ANSHUMANDOCX/USB-C-AUDIO-HUB repository on GitHub; these links point at the commit this page was built from.

USB-C-AUDIO-HUB: common questions

How big is the USB-C-AUDIO-HUB PCB?

The USB-C-AUDIO-HUB measures 64.2 × 33.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB-C-AUDIO-HUB?

55 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USB-C-AUDIO-HUB design files?

From the ANSHUMANDOCX/USB-C-AUDIO-HUB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USB-C-AUDIO-HUB design in my own project?

The repository has no license, so all rights stay with ANSHUMANDOCX. Use it as a reference, and ask the author before reusing the design.

Similar boards