Keychain
antelliJ·KeychainPCB·PCB/keychainProj.kicad_pcb
About the Keychain PCB
Keychain is an open source RISC-V PCB design by antelliJ, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 65.8 mm, with 33 components from 17 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the AMS1117-3.3 and LIS3DHTR. By type, the board carries 12 resistors, 9 diodes, 4 capacitors, 3 ICs, 2 connectors and 1 battery holder.
From the project
Creating a keychain PCB
This is a personalized PCB that aims to be carried around on a keychain, a fun PCB badge similar to the ones at opensauce. I hope this could be an interesting way to introduce myself in an interactive manner if I'm at any tech conferences or the like.
Uses either a CR2032 or USB-C to power a CH32V003 MCU, toggled between using a 2 way switch.
a LIS331HH communicates to the board to activate the LED's based on the motion associated.
Main components on the Keychain
Keychain bill of materials (BOM)
33 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 AMS1117CD-3.3 | TO-252-3_TabPin2 | U1 |
| 1 | LIS3DHTR LIS3DH | LIS3DH_Aliexpress_Module | U2 |
| 1 | CH32V003F4P6 CH32V003FxPx | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4085 | J2 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | PS1240P02BT Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | MST-12D18G4 SPDT Slide Switch MST-12D18G4 SPDT SLIDE SWITCH SHOU HAN(首韩) | SW-SMD_MST-12D18G4-SPDT-SLIDE-SWITCH | SW2 |
| 8 | NCD0805R1 LED | LED_0805_2012Metric | D1, D3, D4, D5, D6, D8, D9, D10 |
| 1 | E6C1209RGBC3UDA LED_RABG | LED_RGB_1210 | D2 |
| 2 | CC0805KRX7R9BB104 100nF | C_0805_2012Metric | C1, C3 |
| 2 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C2, C4 |
| 4 | 0805W8F1000T5E 100 | R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 0 | R_0805_2012Metric | R5, R6 |
| 1 | 0805W8F1200T5E 330 | R_0805_2012Metric | R7 |
| 3 | 0805W8F4701T5E 4k7 | R_0805_2012Metric | R8, R9, R12 |
| 2 | 0805W8F5101T5E 5k1 | R_0805_2012Metric | R10, R11 |
Keychain design files
The KiCad project lives in the antelliJ/KeychainPCB repository on GitHub; these links point at the commit this page was built from.
Keychain: common questions
What microcontroller does the Keychain use?
The Keychain is built around the CH32V003F4P6, from the RISC-V family.
How big is the Keychain PCB?
The Keychain measures 100 × 65.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keychain?
33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keychain design files?
From the antelliJ/KeychainPCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keychain design in my own project?
Yes, under the terms of its MIT license, which antelliJ chose for the repository.
Can I test firmware for the Keychain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105