PS23023
AntoninPvr·PS23023·charge_pump/charge_pump.kicad_sch

About the PS23023 PCB
PS23023 is an open source PCB design by AntoninPvr, published on GitHub. It is a board, with 67 components from 12 distinct parts.
Other key parts include the 9V1 and 1N4148. By type, the board carries 28 ICs, 15 capacitors, 10 connectors, 10 resistors and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Velleman PS23023 schematic on KiCad without any modifications
I haven't changed anything from the original design, It's just a Kicad version of it. It's intended as a reference design to modify my power supply for my own needs.
This is the charge pump schematic used to supply all lcd voltmeters/ammeter modules with 4 "isolated 9V supplies".
Switching circuit use only CD4049UBE and the frequency is set by R1 and C1. You can adjust them to change the frequency if needed. I measured around 40kHz with the given values.
Main components on the PS23023
PS23023 bill of materials (BOM)
67 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 9V1 | U1, U2, U3, U4 | |
| 24 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | U5, U6, U7, U8, U9, U10, U11, U12 +16 |
| 10 | Conn_01x01 | J1, J2, J3, J4, J5, J6, J7, J8 +2 | |
| 2 | 4049 | N1, N2 | |
| 2 | 180u | L1, L2 | |
| 1 | 10n | C1 | |
| 9 | 100n | C2, C7, C8, C9, C10, C11, C12, C13 +1 | |
| 4 | 330n | C3, C4, C5, C6 | |
| 1 | 47u | C15 | |
| 1 | 10k | R1 | |
| 1 | 1k | R2 | |
| 8 | 150 | R3, R4, R5, R6, R7, R8, R9, R10 |
PS23023 design files
The KiCad project lives in the AntoninPvr/PS23023 repository on GitHub; these links point at the commit this page was built from.
- Schematiccharge_pump/charge_pump.kicad_sch
PS23023: common questions
How many components are on the PS23023?
67 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS23023 design files?
From the AntoninPvr/PS23023 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the PS23023 design in my own project?
The repository has no license, so all rights stay with AntoninPvr. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k