Tracker subcarrier adc
About the Tracker subcarrier adc PCB
Tracker subcarrier adc is an open source PCB design by AntonSievering, published on GitHub. It is a 4-layer board measuring 22 × 66 mm, with 57 components from 13 distinct parts.
Other key parts include the 595-TPS7A4700RGWR and AD08100CIMTCXNPB. By type, the board carries 23 capacitors, 23 resistors, 3 ICs, 3 diodes, 3 inductors and 2 connectors.
From the project
Sounding Rocket Tracking and Positioning Project
The rocket carries a transmitter that continuously downlinks telemetry along with timing signals. Multiple ground receivers (3–4 planned) receive the signal and extract the timing information. With the timing data, the system computes the rocket’s position in real time.
This repository contains the PCB projects for TRACKER - GPSDO-V2: 10 MHz oscillator tuned by the GPS timing signals - basestation-rx: S-band timing signal receiver - tracker-tx-fpga: FPGA baseboard with three subcarrier slots - tracker-subcarrier-adc: ADC subcarrier for FPGA baseboard - tracker-subcarrier-dac: DAC subcarrier…
Main components on the Tracker subcarrier adc
Tracker subcarrier adc bill of materials (BOM)
57 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 595-TPS7A4700RGWR TPS7A4701xRGW | Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm_ThermalVias | U1 |
| 2 | AD08100CIMTCXNPB ADC08100 | TSSOP-24_4.4x7.8mm_P0.65mm | U2, U3 |
| 2 | Conn_Coaxial | SMA_Edge_Mount | J2, J3 |
| 3 | LED | D_0603_1608Metric | D1, D2, D3 |
| 1 | 600@100MHz | L_0805_2012Metric | FB4 |
| 2 | MLF1608A1R5JT000 1.5u | L_0603_1608Metric | L1, L2 |
| 6 | 10u | C_0805_2012Metric | C1, C2, C9, C10, C12, C18 |
| 2 | 81-GRM21BR61A476ME5L 47u | C_0805_2012Metric | C3, C5 |
| 3 | 1u | C_0603_1608Metric | C4, C13, C15 |
| 8 | 100n | C_0603_1608Metric | C6, C7, C8, C11, C14, C16, C17, C19 |
| 4 | GCM1885C2A301FA16J 300p | C_0603_1608Metric | C20, C21, C22, C23 |
| 5 | 10k | R_0603_1608Metric | R1, R2, R16, R17, R23 |
| 18 | 0 | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 +10 |
Tracker subcarrier adc design files
The KiCad project lives in the AntonSievering/TRACKER repository on GitHub; these links point at the commit this page was built from.
Tracker subcarrier adc: common questions
How big is the Tracker subcarrier adc PCB?
The Tracker subcarrier adc measures 22 × 66 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Tracker subcarrier adc?
57 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tracker subcarrier adc design files?
From the AntonSievering/TRACKER repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tracker subcarrier adc design in my own project?
The repository has no license, so all rights stay with AntonSievering. Use it as a reference, and ask the author before reusing the design.
More boards in TRACKER
STM32Basestation rx-V2
100 × 100 mm292 parts4LNo license0
FPGATracker tx fpga
100 × 100 mm224 parts6LNo license0
STM32GPSDO
100 × 100 mm179 parts4LNo license0
STM32Tracker tx
100 × 100 mm133 parts4LNo license0
STM32Sampling scope
100 × 100 mm130 parts4LNo license0
STM32Sampling scope-AntonsLaptop
148.8 × 126.5 mm112 parts4LNo license0
STM32Cc1200 comm
86.3 × 31 mm88 parts4LNo license0
Tracker subcarrier dac
22 × 66 mm77 parts4LNo license0
ClockSynthesizer
50.3 × 36.5 mm66 parts4LNo license0
Digitizer
36 × 37.3 mm44 parts2LNo license0
Testboard
100 × 69.2 mm19 parts4LNo license0