Sampling scope-AntonsLaptop
About the Sampling scope-AntonsLaptop PCB
Sampling scope-AntonsLaptop is an open source STM32 PCB design by AntonSievering, published on GitHub. It is a 4-layer board measuring 148.8 × 126.5 mm, with 112 components from 18 distinct parts.
Its main chip is the 511-STM32H562RGT6, from the STM32 family. Other key parts include the SY89296UMG, ADCMP582, SY10EP51VKG, LMV331 and SY89831U. By type, the board carries 62 capacitors, 35 resistors, 10 ICs, 4 connectors and 1 inductor.
From the project
Sounding Rocket Tracking and Positioning Project
The rocket carries a transmitter that continuously downlinks telemetry along with timing signals. Multiple ground receivers (3–4 planned) receive the signal and extract the timing information. With the timing data, the system computes the rocket’s position in real time.
This repository contains the PCB projects for TRACKER - GPSDO-V2: 10 MHz oscillator tuned by the GPS timing signals - basestation-rx: S-band timing signal receiver - tracker-tx-fpga: FPGA baseboard with three subcarrier slots - tracker-subcarrier-adc: ADC subcarrier for FPGA baseboard - tracker-subcarrier-dac: DAC subcarrier…
Main components on the Sampling scope-AntonsLaptop
Sampling scope-AntonsLaptop bill of materials (BOM)
112 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SY89296UMG | QFN50P500X500X90-33N-D | IC1 |
| 3 | ADCMP582 | QFN50P300X300X80-17N-D | IC2, IC4, IC6 |
| 1 | SY10EP51VKG | SOP65P490X110-8N | IC3 |
| 1 | 511-STM32H562RGT6 STM32H562RGT6 | QFP50P1200X1200X160-64N | IC5 |
| 3 | LMV331 | SOT-353_SC-70-5 | U1, U2, U4 |
| 1 | SY89831U | QFN-16_3x3mm_P0.5mm | U3 |
| 3 | SMA | SMA_Edge_Mount | J1, J2, J3 |
| 1 | 710-61201021621 Conn_02x05_Counter_Clockwise | IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | 81-BLM18KG102SH1D 1k@100MHz | L_0603_1608Metric | FB1 |
| 37 | 100n | C_0603_1608Metric | C1, C2, C7, C8, C11, C12, C13, C14 +29 |
| 7 | 10n | C_0603_1608Metric | C3, C4, C5, C6, C33, C34, C35 |
| 15 | 1u | C_0603_1608Metric | C9, C10, C17, C18, C22, C23, C30, C31 +7 |
| 2 | 2u2 | C_0603_1608Metric | C40, C41 |
| 1 | 10u | C_0805_2012Metric | C42 |
| 11 | RC0603FR-07127RL 127 | R_0603_1608Metric | R1, R3, R6, R8, R10, R21, R23, R25 +3 |
| 11 | RMCF0603FT82R5 82.5 | R_0603_1608Metric | R2, R4, R7, R9, R11, R22, R24, R26 +3 |
| 12 | 0 | R_0603_1608Metric | R5, R12, R13, R14, R15, R16, R17, R18 +4 |
| 1 | 49R9 | R_0603_1608Metric | R27 |
Sampling scope-AntonsLaptop design files
The KiCad project lives in the AntonSievering/TRACKER repository on GitHub; these links point at the commit this page was built from.
Sampling scope-AntonsLaptop: common questions
What microcontroller does the Sampling scope-AntonsLaptop use?
The Sampling scope-AntonsLaptop is built around the 511-STM32H562RGT6, from the STM32 family.
How big is the Sampling scope-AntonsLaptop PCB?
The Sampling scope-AntonsLaptop measures 148.8 × 126.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Sampling scope-AntonsLaptop?
112 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sampling scope-AntonsLaptop design files?
From the AntonSievering/TRACKER repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Sampling scope-AntonsLaptop design in my own project?
The repository has no license, so all rights stay with AntonSievering. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sampling scope-AntonsLaptop without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in TRACKER
STM32Basestation rx-V2
100 × 100 mm292 parts4LNo license0
FPGATracker tx fpga
100 × 100 mm224 parts6LNo license0
STM32GPSDO
100 × 100 mm179 parts4LNo license0
STM32Tracker tx
100 × 100 mm133 parts4LNo license0
STM32Sampling scope
100 × 100 mm130 parts4LNo license0
STM32Cc1200 comm
86.3 × 31 mm88 parts4LNo license0
Tracker subcarrier dac
22 × 66 mm77 parts4LNo license0
ClockSynthesizer
50.3 × 36.5 mm66 parts4LNo license0
Tracker subcarrier adc
22 × 66 mm57 parts4LNo license0
Digitizer
36 × 37.3 mm44 parts2LNo license0
Testboard
100 × 69.2 mm19 parts4LNo license0
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988