HardLabs

Pokus o lepsi usporadani

ANToNyS21·DMP2025·schema dmp/pokus o lepsi usporadani.kicad_pcb

Pokus o lepsi usporadani PCB layout, top view — open source AVR/Arduino board by ANToNyS21

About the Pokus o lepsi usporadani PCB

Pokus o lepsi usporadani is an open source AVR/Arduino PCB design by ANToNyS21, published on GitHub. It is a 2-layer board measuring 245 × 153.3 mm, with 28 components from 20 distinct parts.

Its main chip is the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family. By type, the board carries 4 connectors, 3 modules, 3 resistors, 1 diode and 1 capacitor.

From the project

https://drive.google.com/file/d/1NYgzzBReGRTbW6AwwNUOp2N6VFr0sSx1/view?usp=sharing

Main components on the Pokus o lepsi usporadani

Arduino_Mega2560_R3_Shield

Pokus o lepsi usporadani bill of materials (BOM)

28 components, 20 distinct parts.

QtyPartRefs
1
Arduino_Mega2560_R3_Shield
A1
2
~
M1, M2
1
+12v
J1
1
GND
J2
1
out+ regulated
J3
1
out-
J4
1
enkoder U
E1
1
enkoder I
E2
1
H_mustek
IO1
2
step_up_28V
IO2, IO3
1
rele_2x
IO4
4
MCP41HV51-104E
IO5, IO6, IO10, IO11
4
MCP41HV51-502E
IO7, IO8, IO12, IO13
1
rele_4x
IO9
1
ADS1115_I2C
IO14
1
display
D1
1
680uF/50V
C1
1
0.2R
R1
1
220k
R2
1
17k8
R3

Pokus o lepsi usporadani design files

The KiCad project lives in the ANToNyS21/DMP2025 repository on GitHub; these links point at the commit this page was built from.

Pokus o lepsi usporadani: common questions

What microcontroller does the Pokus o lepsi usporadani use?

The Pokus o lepsi usporadani is built around the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family.

How big is the Pokus o lepsi usporadani PCB?

The Pokus o lepsi usporadani measures 245 × 153.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pokus o lepsi usporadani?

28 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pokus o lepsi usporadani design files?

From the ANToNyS21/DMP2025 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pokus o lepsi usporadani design in my own project?

The repository has no license, so all rights stay with ANToNyS21. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pokus o lepsi usporadani without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in DMP2025

Similar boards