HardLabs

Sucsess ehh

ANToNyS21·DMP2025·schema dmp/sucsess_ehh.kicad_pcb

Sucsess ehh PCB layout, top view — open source AVR/Arduino board by ANToNyS21

About the Sucsess ehh PCB

Sucsess ehh is an open source AVR/Arduino PCB design by ANToNyS21, published on GitHub. It is a 2-layer board measuring 260 × 190 mm, with 35 components from 27 distinct parts.

Its main chip is the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family. Other key parts include the L78S05CV. By type, the board carries 8 connectors, 3 modules, 3 capacitors, 3 resistors, 1 IC and 1 diode.

From the project

https://drive.google.com/file/d/1NYgzzBReGRTbW6AwwNUOp2N6VFr0sSx1/view?usp=sharing

Main components on the Sucsess ehh

L78S05CVArduino_Mega2560_R3_Shield

Sucsess ehh bill of materials (BOM)

35 components, 27 distinct parts.

QtyPartRefs
1
L78S05CV
U1
1
Arduino_Mega2560_R3_Shield
A1
2
~
M1, M2
1
+12v
J1
1
GND
J2
1
out+ regulated
J3
1
out-
J4
1
FAN1+
J5
1
FAN1-
J6
1
arduino in 12v+
J7
1
arduino in GNDD
J8
1
enkoder U
E1
1
enkoder I
E2
1
H_mustek
IO1
2
step_up_28V
IO2, IO3
1
rele_2x
IO4
4
MCP41HV51-104E
IO5, IO6, IO10, IO11
4
MCP41HV51-502E
IO7, IO8, IO12, IO13
1
rele_4x
IO9
1
ADS1115_I2C
IO14
Show 7 more
QtyPartRefs
1
display
D1
1
680uF/50V
C1
1
0,1 µF
C2
1
0,01 µF
C3
1
0.2R
R1
1
220k
R2
1
17k8
R3

Sucsess ehh design files

The KiCad project lives in the ANToNyS21/DMP2025 repository on GitHub; these links point at the commit this page was built from.

Sucsess ehh: common questions

What microcontroller does the Sucsess ehh use?

The Sucsess ehh is built around the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family.

How big is the Sucsess ehh PCB?

The Sucsess ehh measures 260 × 190 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sucsess ehh?

35 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sucsess ehh design files?

From the ANToNyS21/DMP2025 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Sucsess ehh design in my own project?

The repository has no license, so all rights stay with ANToNyS21. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sucsess ehh without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in DMP2025

Similar boards