Arduino OpenTherm shield
About the Arduino OpenTherm shield
Arduino OpenTherm shield is an open source PCB design by anway0404, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 45 components from 35 distinct parts.
Other key parts include the TPS61040DBV and LTV-817S. By type, the board carries 18 resistors, 11 diodes, 6 transistors, 4 capacitors, 3 ICs and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Arduino hardware shield to send and receive data from Opentherm devices
bash git clone https://github.com/anway0404/ArduinoOpenThermshield/raw/refs/heads/master/production/OpenArduinoThermshieldv3.8.zip cd ArduinoOpenThermshield cpp #include
void setup() { https://github.com/anway0404/ArduinoOpenThermshield/raw/refs/heads/master/production/OpenArduinoThermshieldv3.8.zip(9600); // Initialize OpenTherm communication }
void loop() { // Read data from OpenTherm devices }
Main components on the Arduino OpenTherm shield
Arduino OpenTherm shield bill of materials (BOM)
45 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61040DBV | SOT-23-5 | U1 |
| 2 | LTV-817S | SMDIP-4_W9.53mm | U2, U3 |
| 4 | MMBT2907A | SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | MMBT2222A | SOT-23 | Q5, Q6 |
| 1 | BOILER | Altech_AK100_1x02_P5.00mm | J1 |
| 1 | THERM | Altech_AK100_1x02_P5.00mm | J2 |
| 1 | 1N5819W | D_SOD-123 | D1 |
| 4 | 1N4148W | D_SOD-123 | D2, D3, D4, D5 |
| 1 | 4V7 | D_SOD-123 | D6 |
| 1 | 13V | D_SOD-123 | D7 |
| 1 | 4V3 | D_SOD-123 | D8 |
| 1 | C84256 PWR | LED_0805_2012Metric | D9 |
| 1 | C2297 RxB | LED_0805_2012Metric | D10 |
| 1 | C2296 RxT | LED_0805_2012Metric | D11 |
| 1 | 10UH 10uH | Inductor_4.2x4.4mm | L1 |
| 1 | 10U 10u | C_0603_1608Metric | C1 |
| 1 | 22P 22p | C_0603_1608Metric | C2 |
| 1 | 100N 100n | C_0603_1608Metric | C3 |
| 1 | 10U 10u | C_0805_2012Metric | C4 |
| 1 | 240K 240k | R_0603_1608Metric | R1 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 13K 13k | R_0603_1608Metric | R2 |
| 1 | 330 | R_0603_1608Metric | R3 |
| 1 | 220 | R_0603_1608Metric | R4 |
| 2 | 100 | R_0603_1608Metric | R5, R8 |
| 1 | 560 | R_0603_1608Metric | R6 |
| 2 | 10K 10k | R_0603_1608Metric | R7, R13 |
| 1 | 33K 33k | R_0603_1608Metric | R9 |
| 1 | C21189 0R | R_0603_1608Metric | R10 |
| 1 | 47 | R_0603_1608Metric | R11 |
| 1 | 20K 20k | R_0603_1608Metric | R12 |
| 1 | 1k | R_0603_1608Metric | R14 |
| 1 | 4K7 4k7 | R_0603_1608Metric | R15 |
| 1 | 1K8 1k8 | R_0603_1608Metric | R16 |
| 1 | 1K1 1k1 | R_0603_1608Metric | R17 |
| 1 | 1K5 1k5 | R_0603_1608Metric | R18 |
Arduino OpenTherm shield design files
The KiCad project lives in the anway0404/Arduino_OpenTherm_shield repository on GitHub; these links point at the commit this page was built from.
Arduino OpenTherm shield: common questions
How big is the Arduino OpenTherm shield?
The Arduino OpenTherm shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Arduino OpenTherm shield?
45 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino OpenTherm shield design files?
From the anway0404/Arduino_OpenTherm_shield repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino OpenTherm shield design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which anway0404 chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979