HardLabs

Keyboardv1

Anycircle11139s·keyboardv1·Keyboard/Mykeyboard.kicad_pcb

Keyboardv1 PCB layout, top view — open source RP2040/RP2350 board by Anycircle11139s

About the Keyboardv1 PCB

Keyboardv1 is an open source RP2040/RP2350 PCB design by Anycircle11139s, published on GitHub. It is a 2-layer board measuring 335.8 × 99.1 mm, with 137 components from 9 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 68 switches, 68 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

Keyboardv1, from the project README
From the project README

Main components on the Keyboardv1

RaspberryPi_Pico

Keyboardv1 bill of materials (BOM)

137 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
57
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +49
1
SW_Push
SW14
2
SW_Push
SW16, SW29
2
SW_Push
SW31, SW56
2
SW_Push
SW43, SW45
3
SW_Push
SW59, SW60, SW61
1
SW_Push
SW62
68
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +60

Keyboardv1 design files

The KiCad project lives in the Anycircle11139s/keyboardv1 repository on GitHub; these links point at the commit this page was built from.

Keyboardv1: common questions

What microcontroller does the Keyboardv1 use?

The Keyboardv1 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keyboardv1 PCB?

The Keyboardv1 measures 335.8 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboardv1?

137 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keyboardv1 design files?

From the Anycircle11139s/keyboardv1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keyboardv1 design in my own project?

The repository has no license, so all rights stay with Anycircle11139s. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keyboardv1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards